Abstract:An independent metering valve control hydraulic system (IMVCHS) adopts two independent valves to separately control the meter-in and meter-out orifices. This structure increases the degree of freedom of the control, and improves its flexibility and energy-saving performance. In this study, an IMVCHS was established that applies a control system developed to research the pressure and flow compound control performance. A two-level fuzzy control algorithm based on the calculated flow rate feedback from the spool displacement was proposed to realize high precision flow control, and the two-level fuzzy control algorithm based on the pressure feedback was also adopted to enhance the pressure performance under a dynamic load. A simulation model was established, and its key parameters identified experimentally using the simulated load of a hydraulic bridge circuit. The experimental results show that the proposed flow controller has higher control accuracy with an error of less than 2%, and the flow adjustment time for 40 L/min step control is 320 ms. The pressure controller with a two-level closed-loop fuzzy algorithm can significantly improve these pressure dynamic and static performances, and achieve a step response time of less than 180 ms. Combining the pressure and flow controllers, the pressure and flow compound control of the IMVCHS is realized, and the capacity for coping with load fluctuations is also identified, with compound adjustment times of generally less than 200 ms, and occasionally less than 100 ms. This control system therefore achieves a good performance for pressure and flow compound control, and is able to widen the application of independent metering control technology.

CMAC-PID Composite Control for the Position Control of a Fully Variable Valve System

Fuzzy PI Vector Control Design of AC Servo Permanent Magnet Synchronous Motor System

Paralleling Hydraulic Control of Variable Frequency Motor and Valve for the Swing Mechanism of Segment Erector

BLDCM System Based on Fuzzy Control Technology

A hybrid control strategy for the GPCM electro-hydraulic position servo control system

Hybrid fuzzy PID control of hydraulic robot

Dynamic control set-model predictive control for field-oriented control of VSI-PMSM

Harmonic and Synchronous Compound Control of a Dual-Valve Controlled Single-Rod Electro-Hydraulic Actuator.

Research on dynamic performance of independent metering valve-cylinder system based on double pressure compound control

Fuzzy PID Controller Design for a Permanent Magnet Linear Synchronous Motor Feeding System

Collaborative Simulation and Integrated CMAC and PID Optimization and Control of an Aerial Work Platform

The generalized pulse code modulation pneumatic servo system and its control

Design of Speed Control System Based on Fuzzy-PID Hybrid Control for DC Motor

Design and control of the hydraulic reciprocating pump

Development of Parallel-Connected Pump–valve-Coordinated Control Unit with Improved Performance and Efficiency

Design of Flow and Pressure Coupling Controller for Independent Metering Valves Control System

Analysis of Pressure and Flow Compound Control Characteristics of an Independent Metering Hydraulic System Based on a Two-Level Fuzzy Controller

Pump/valves coordinate control of the independent metering system for mobile machinery

Simulation of Separate Meter in and Separate Meter out Valve Arrangement Used for Synchronized Control of Two Cylinders

RESEARCH ON COMPENSATION FOR VARIABLE DEAD-ZONE CHARACTERISTIC OF ELECTRO-HYDRAULIC PROPORTIONAL DIRECTION VALVE IN POSITION CONTROL

Analysis and Design of Energy Regulation Device in Energy Regulation Based Variable Speed Electro-hydraulic Control System