Rapidly Fabricated Soft Spring Actuator Via Laminated Laser-Lithographed 2D Polyurethane Layers

Hao Tian,Zezhong Gao,Yongjun Gong

DOI: https://doi.org/10.1016/j.mechatronics.2023.102985

IF: 3.379

2023-01-01

Mechatronics

Abstract:With the increasing demand for flexible actuators, traditional soft manufacturing techniques such as 3D printing may become the limiting factor for fast and high-volume prototyping of such devices. In this paper, we proposed a new soft actuator that utilizes multiple layers of near isotropic elastic sheets to achieve anisotropic (directional) actuation, that is, to form a 3D device with 2D functional layers. An analytical model for the actuator's steady state deformation under external load is developed, followed by the numerical analysis and finite element evaluation of the actuator. Then, the fabrication process of the actuator is demonstrated, and an experimental testbed is assembled to test the characteristics of the prototype. The kinematic and force output characteristics of the actuator are experimentally validated. Finally, the validated models are used to study the deformation performance impact of the sandwiched 2D layers on the whole device. It is discovered that the proposed actuator is capable of achieving the desired function with parts purely manufactured with 2D material processing technologies. Initial test results showed that for a prototype soft finger of 25.5 mm, it achieves a linear voltage to displacement conversion region from 0 mm to 5.38 mm between 10 V and 21 V, with a maximum absolute operation distance reaching 18 mm. In terms of fabrication duration, our actuator can be completed from design to processing and to deployment within 2 h.