Abstract:Recently, MOF-derived metal oxides have been demonstrated as excellent semiconductor materials. Their derivatives can retain the high porosity and high specific surface area of the parent MOFs, effectively improving the adsorption capacity and mass transfer rate of reactive substances. Herein, UiO-67 was selected as the substrate due to its high hydrothermal stability and high specific surface area. Through the in situ growth of TiO2 nanoparticles, a series of double metal composite catalysts (ZrxTi/C) were produced after calcination at 400 degrees C. The X-ray diffraction (XRD) patterns showed that the UiO-67 crystal structure of collapsed after calcination, forming a Zr-O-C/TiO2 heterojunction. Energy-dispersive spectrometry (EDS) mapping images showed that Ti, Zr, and O were evenly distributed throughout the materials without obvious aggregation. Compared to conventional inorganic semiconductor materials, ZrxTi/C heterojunction catalysts provided much higher BET surface area (317 m(2)g(-1)) for the effective enrichment of contaminants on the catalyst surface. Tetracycline was selected as a representative antibiotic to study photodegradation performance under a 300 W Xenon lamp. Among the obtained catalysts, the Zr0.3Ti/C heterojunction catalyst exhibited the best photocatalytic efficiency, achieving 98% degradation within 30 min in a 10 mg.L-1 tetracycline solution. Fluorescence spectra, electrochemical impedance spectroscopy, and transient photocurrent responses showed that the Zr0.3Ti/C heterojunction catalyst exhibited the fastest charge-hole separation rate and a maximum photocurrent density of 8.75 mu A.cm(-2), which was 2.64 and 3.71 times those of UiO-67 and UiO-67(0.3)/TiO2, respectively. The mechanism of tetracycline photodegradation was determined by UV-visible diffuse-reflectance absorption spectroscopy, Mott-Schottky plots, and electron spin resonance technology. A direct Z-scheme charge separation path was formed by the transfer and recombination of photoexcitede. in the conduction band (CB) of Zr-O-C with h(+) in the valence band (VB) of TiO2, which effectively reduced the combination rate of e. and h(+) in Zr-O-C and TiO2. The photodegradation rate constant of Zr0.3Ti/C was 16 and 3.7 times those of TiO2 and Zr-O-C, respectively, due to its large specific surface area and excellent tetracycline adsorption performance. Furthermore, the Zr-O-C/TiO2 heterostructure exhibiting suitable energy level matching and containing highly conductive carbon material improved the separation and migration of electron-hole pairs. Mechanistic studies revealed that the three types of radicals, superoxide radicals (O-2(center dot-)) ,hydroxyl radicals (center dot OH), and a small amount of holes (h(+)) simultaneously promoted tetracycline photodegradation. After five recycling tests, Zr0.3Ti/C heterojunction catalyst maintained 91.2% removal efficiency for tetracycline, indicating good cycle stability. Combining the synergistic effects of adsorption and photodegradation, using bimetallic heterojunction composites with high specific surface area is promising for the photodegradation of environmental pollutants.

Efficient Activation of Persulfate by Ti3C2 MXene QDs Modified ZnFe2O4 for the Rapid Degradation of Tetracycline

Efficient Degradation of Tetracycline by Cobalt Ferrite Modified Alkaline Solution Nanofibrous Ti3C2Tx MXene Activated Peroxymonosulfate System: Mechanism Analysis and Pathway

Rapid Catalytic Degradation of Tetracycline by nZVI/Co@MoS2-Activated PMS

Enhanced degradation of tetracycline by TiO2@MXene with peroxydisulfate under visible light irradiation

Activation of peroxymonosulfate by novel magnetically recyclable CoFe2O4/MXene quantum dots composites for rapid degradation of tetracycline: Synergistic performance and mechanisms

Efficient degradation of tetracycline by cobalt ferrite modified alkaline solution nanofibrous Ti 3 C 2 T x MXene activated peroxymonosulfate system: Mechanism analysis and pathway

Efficient Activation of K2S2O8 by MoS2-ZnFe2O4 Composite for the Rapid Degradation of Tetracycline

Magnetic MoS2/Fe3O4 composite as an effective activator of persulfate for the degradation of tetracycline: performance, activation mechanisms and degradation pathways

Dual Activation of Peroxymonosulfate with FeS2@Co3O4-C Catalyst and Visible Light for the Efficient Degradation of Tetracycline

Oxidation of Tetracycline Hydrochloride by Peroxomonosulfate and Peroxodisulfate on a ZnNi@NC Carbonaceous Catalyst: Role of Non-Radical Species and Mediated or Direct Electron Transfer Mechanisms

Degradation of tetracycline by activating persulfate with ZnFe2O4-Bi2MoO6 catalyst under visible light

Catalytic Degradation of Tetracycline Hydrochloride by Persulfate Activated with Nano Fe0 Immobilized Mesoporous Carbon

In-situ synthesized 2D MXene/TiO2/Fe hybrid with (001)-(101) surface heterojunction for degradation of tetracycline under visible light.

Ferrocene Modified G-C3n4 As a Heterogeneous Catalyst for Photo-Assisted Activation of Persulfate for the Degradation of Tetracycline

Mesoporous Amorphous Feooh-Encapsulated Bio2-X Photocatalyst with Harnessing Broad Spectrum Toward Activation of Persulfate for Tetracycline Degradation

Accelerated Tetracycline Degradation by Persulfate Activated with Heterogeneous Magnetic NixFe3−xO4 Catalysts

Spherical Bi4O5I2/MoS2 QDs Nanocomposites Activate Persulfate to Degrade Tetracycline under Visible Light

Bifunctional Activation of Peroxymonosulfate over CuS/g-C3N4 Composite for Efficient Degradation of Tetracycline Antibiotics

Enhancement of Peroxydisulfate Activation for Complete Degradation of Refractory Tetracycline by 3D Self-Supported MoS2/MXene Nanocomplex

Highly Efficient Photocatalytic Degradation of Tetracycline Using a Bimetallic Oxide/Carbon Photocatalyst

Porous ZnS/MXene Ti 3 C 2 nanocomposite with a terrific photocatalytic ability for tetracycline hydrochloride degradation