Abstract:A Co/Ni‐free biphasic O2/O3‐type layered oxide, Li0.9[Li0.3Mn0.7]O2, is designed for Li‐rich cathode materials for the first time, in which volume changes of both O2/O3 phases and spinel phase generation can be effectively restrained during (de)lithiations, further enhancing structural stability upon long cycles. Typical Li‐rich layered oxides are widely regarded as promising cathode candidates for high‐energy‐density Li‐ion batteries because of additional output capacities boosted by oxygen redox activities. However, its commercialized applications are hindered by serious capacity loss and voltage decay related to structural degradation upon cycling. Herein, a Co/Ni‐free biphasic O2/O3‐type layered cathode material is proposed, Li0.9[Li0.3Mn0.7]O2, which has been successfully prepared by the Li+/Na+ ion‐exchange strategy and characterized by the XRD Rietveld refinement and SAED as well as HRTEM analyses. O2/O3‐type layered cathode material with an approximate composition of 81% O2 and 19% O3 phases are confirmed. Furthermore, the biphasic cathode exhibits a high discharge capacity of 232 mAh g−1 with capacity retention of 88.1% after 500 cycles at a current density of 200 mA g−1. That is, volume changes of the O3‐type phase are effectively restricted during Li+ (de)intercalations, further enhancing the structural stability and suppressing the formation of spinel phase due to the biphasic structural design. Altogether, these findings prove the biphasic structural design is a feasible strategy to achieve Li‐rich cathode materials with high capacity and long‐term cycle stability.

Enabling high nickel LiNi0.9Co0.1O2 cathode with enhanced cycling performance at high temperature by a phospholipid-like protective layer

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Realizing Superior Cycling Stability of Ni-Rich Layered Cathode by Combination of Grain Boundary Engineering and Surface Coating

Enhanced cycling performance of Li ion batteries based on Ni-rich cathode materials with LaPO4/Li3PO4 co-modification

Improving the Structure and Cycling Stability of Ni-Rich Layered Cathodes by Dual Modification of Yttrium Doping and Surface Coating

Enhancing Structure and Cycling Stability of Ni-rich Layered Oxide Cathodes at Elevated Temperatures Via Dual-Function Surface Modification

In-situ construction protective layer and phosphate doping synergistically improve the long-term cycle stability of LiNi0.6Co0.1Mn0.3O2

Face-lifting the Surface of LiNi0.8Co0.15Al0.05O2cathode Via Y(PO3)3to Form Anin Situtriple Composite Li-ion Conductor Coating Layer with the Enhanced Electrochemical Performance.

LiNi0.8Co0.15Al0.05O2 Cathodes Exhibiting Improved Capacity Retention and Thermal Stability Due to a Lithium Iron Phosphate Coating

Enabling Long‐Term Cycling Stability Within Layered Li‐Rich Cathode Materials by O2/O3‐Type Biphasic Design Strategy

Building a Self‐Adaptive Protective Layer on Ni‐Rich Layered Cathodes to Enhance the Cycle Stability of Lithium‐Ion Batteries

Realizing the Single-Crystalline LiNi 0.90 Mn 0.05 Co 0.05 O 2 Cathode with Long-Life and High-Safety Property Driven by Polysiloxane Covering and PO43- Doping

Pre-Deoxidation of Layered Ni-Rich Cathodes to Construct a Stable Interface with Electrolyte for Long Cycling Life

Improving the Electrochemical Performance of Ultrahigh-Nickel-based Layered LiNi0.95Mn0.05O2 Cathode Through Cobalt Modification for Next-Generation High-Energy Li-ion Batteries

Integrated co-modification of PO43− polyanion doping and Li2TiO3 coating for Ni-rich layered LiNi0.6Co0.2Mn0.2O2 cathode material of Lithium-Ion batteries

Organic coating strategy with oxidized oxygen anion capture to suppress lattice oxygen evolution of Ni-rich cathode materials at high voltage

Protective and ion conductive: High-Rate Ni-Rich cathode with enhanced cyclic stability via One-Step bifunctional dual-layer coating

Enhanced cyclability and reversibility of nickel-rich cathode for lithium-ion batteries via LiH2PO4 assisted saturated Li2CO3 washing

An ultrathin solid-state electrolyte film coated on LiNi<sub>0.8</sub>Co<sub>0.1</sub>Mn<sub>0.1</sub>O<sub>2</sub> electrode surface for enhanced performance of lithium-ion batteries

An ultrathin solid-state electrolyte film coated on LiNi0.8Co0.1Mn0.1O2 electrode surface for enhanced performance of lithium-ion batteries