Abstract:Re-entrant honeycomb lattice structures offer significant advantages, such as a high strength-to-weight ratio, superior energy absorption capabilities, and efficient material usage. However, for design optimization, the computational challenges posed by simulating extensive structures featuring lattice cells demand an exponential increase in degrees of freedom, inevitably prolonging computational time. The present work addresses some of the challenges in simulating these structures by employing numerical homogenization and investigating the effective elastic properties, aiming to reduce computational costs while maintaining accuracy. The homogenization approach is validated using experiments on lattice structures made in polymer. The study also evaluates the applicability of existing analytical models by comparing their predictions with numerical homogenization results. A comprehensive analysis considering the structural parameters, namely re-entrant angle ( ) and relative density ( ), is presented to understand the prediction accuracy of different analytical models. Both uncertainty and sensitivity analyses were conducted to quantify the influence of these structural parameters on the effective properties and to assess the variability due to probable geometric uncertainties introduced in manufacturing. Additionally, the influence of cell density on the homogenization model's accuracy is also examined. The findings reveal good agreement between the lattice simulation, the homogenized model, and the experimental result within the linear elastic limit. The study infers that amongst the analytical models, Malek's model is highly accurate for predicting , , and Poisson's ratio for higher and up to 30% but shows significant deviations for , , and , necessitating numerical homogenization for higher accuracy beyond these ranges. The uncertainty analysis indicates that elastic moduli such as and exhibit the highest sensitivity to variations in strut thickness and angle, highlighting the need for precise manufacturing control to mitigate variability in effective elastic properties. The sensitivity analysis revealed that strut thickness ( t ) significantly influences the elastic and shear moduli, while the interaction of and t plays a crucial role in determining Poisson's ratios for the auxetic honeycomb lattice. Additionally, numerical homogenization effectively predicts the elastic properties of re-entrant honeycomb structures with higher accuracy and lower computational costs. This comprehensive analysis enhances the understanding and practical application of both analytical and numerical methods in lattice structure design.

Analytical homogenization for equivalent in-plane elastic moduli of honeycomb structures with stiffened joints

VAM-based equivalent-homogenization model for 3D re-entrant auxetic honeycomb structures

Equivalent In-Plane Elastic Moduli of Honeycomb Materials under Hypergravity Conditions

Hybrid hierarchical square honeycomb with widely tailorable effective in-plane elastic modulus

Equivalent orthotropic properties of periodic honeycomb structure: strain-energy approach and homogenization

Design 3D improved star-shaped honeycomb with different tip angles from 2D analytical star-shaped model

Symplectic stiffness method for the buckling analysis of hierarchical and chiral cellular honeycomb structures

Elastic properties of honeycombs with spline curve cell walls

A comprehensive study on numerical homogenization of re-entrant honeycomb lattice and analytical model assessment

Refined Analysis of Torsion and In-plane Shear of Honeycomb Sandwich Structures

Energy absorption performance of honeycombs with curved cell walls under quasi-static compression

Identification of Equivalent Stiffness Parameters of Honeycomb Sandwich Shell Using Detailed Cell Structure Analysis

An approach on identification of equivalent properties of honeycomb core using experimental modal data

Novel 2D star-shaped honeycombs with enhanced effective Young’s modulus and negative Poisson’s ratio

Analysis of effective elastic parameters of natural bamboo honeycomb cell structure

Three-dimensional enhanced star-shaped honeycombs with negative thermal expansion

In-plane elasticity of a novel arcwall-based double-arrowed auxetic honeycomb design: Energy-based theoretical analysis and simulation

In-Plane Compressive Responses of Non-Homogenous Re-Entrant Honeycombs Fabricated by Fused Deposition Modelling Manufactured

Evaluation of the influence of design in the mechanical properties of honeycomb cores used in composite panels

Energy absorption analysis under in-plane impact of hexachiral honeycomb with different arrangements

Dynamic Characteristics and Effective Stiffness Properties of Sandwich Panels with Hierarchical Hexagonal Honeycomb