Abstract:Nickel-based single crystal superalloys (Ni-SXs) are of great interests in aircraft industry due to their excellent high temperature creep strength deriving from the rigid gamma/gamma prime (gamma/gamma') micro-structure and the single crystal nature. The creep properties of Ni-SXs depend strongly on the degradation rate of the original rigid gamma/gamma' microstructure with the dislocation movements in the microstructure. Since the applied temperature and stress strongly affect the dislocation movements, the different creep mechanisms are displayed to Ni-SXs during low temperature (similar to 750 degrees C), mid-temperature (similar to 950 degrees C) and high temperature (similar to 1100 degrees C) creep. The creep deformation during low temperature creep is mainly caused by the shearing of gamma' phase by a limited number of dislocations, while high temperature creep mainly occurs to the accumulation of creep strains with the increased dislocation activities in gamma phase. To enhance the creep properties of alloy, a variety of strategies of the microstructural optimization need to be considered. One is to increase the volume fraction of gamma' phase to enhance the precipitation strengthening effects. But excessive amounts of gamma' phase are disadvantageous to low temperature strength of alloy. The coarsening of gamma' phase and the rafting process strongly correlates to dislocation movements. It is of importance to discuss the specific mechanisms of coarsening and rafting as well as their influence to the creep properties of alloy. The lattice misfit between the gamma and gamma' phase plays an important role in influencing the coarsening of gamma' phase and the creep properties of alloy. A proper lattice misfit helps to form the cubic gamma' phase which is advantageous to alloy. But a too large lattice misfit can promote the coarsening of gamma' phase that damages the structural stability of alloy at high temperatures. The increased additions of refractory elements in alloy promote the formation of topologically close-packed (TCP) phase. TCP phase facilitates the nucleation and propagation of micro-cracks around it that damages the creep properties of alloy. This review aims to summarize some aspects of microstructural evolution during creep of alloy with considering their effects to creep properties. To guide the design of Ni-SXs in future, some perspectives about the microstructural optimization are properly provided. (C) 2019 Elsevier B.V. All rights reserved.

A morphological control strategy of y' precipitates in nickel-based single-crystal superalloys: an aging design, fundamental principle, and evolutionary simulation

Aging process design based on the morphological evolution of γ′ precipitates in a 4th generation nickel-based single crystal superalloy

Influence of Cooling Rate on the Formation of Bimodal Microstructures in Nickel-Base Superalloys During Continuous Two-Step Aging

Microstructural Rejuvenation in a Ni-based Single Crystal Superalloy

Temperature Effects on Deformation Substructures and Mechanisms of a Ni-based Single Crystal Superalloy

Microstructural evolution and creep mechanisms in Ni-based single crystal superalloys: A review

Creep Behavior and Deformation Mechanism of a Third-Generation Single Crystal Ni-Based Superalloy at 980 °C

Microstructural and Compositional Design of Ni-based Single Crystalline Superalloysd - A Review

Directional coarsening behavior of primary γ′ phase in Ni3Al-based superalloy during aging heat treatment

Investigation of Precipitation Behavior of a Novel Ni-Fe-Based Superalloy during High-Temperature Aging Treatment

New strategy to improve the overall performance of single-crystal superalloys by designing a bimodal γ′ precipitation microstructure

Impact of Aging Temperature on the Performance of a Nickel-Iron-Based Superalloy

Correlations Between Microstructure Evolution and Mechanical Behavior of a Nickel-Based Single Crystal Superalloy with Long-Term Aging Effects

Study of Aging Temperature on the Thermal Compression Behaviors and Microstructure of a Novel Ni-Cr-Co-Based Superalloy

Precipitation behavior of γ′ phase with a multi-model morphology in the Ni-based superalloy GH4720Li during water quenching and subsequent artificial aging and related mechanisms

Growth and dissolution behavior and morphology evolution of γ' precipitates in GH4742 nickel-based superalloy

The Dependence of Stress and Strain Rate on the Deformation Behavior of a Ni‐based Single Crystal Superalloy at 1050°C

Short Study on Mechanism of Morphology Change of γ′ Precipitates in IN718 Plus

A Study of the Internal Deformation Fields and the Related Microstructure Evolution during Thermal Fatigue Tests of a Single-Crystal Ni-Base Superalloy

Precipitation behaviors and property variations of directionally solidified Cu-15Ni-8Sn alloy

Deformation mechanisms of low cycle fatigue of a fourth generation Ni-based single crystal superalloy