Abstract:Two kinds of graphene–sulfur composites with 50 wt% of sulfur are prepared using hydrothermal method and thermal mixing, respectively. Transmission Electron Microscopy (TEM) and Energy Dispersive X-ray Spectra mapping show that sulfur nanocrystals with size of ∼5 nm dispersed on graphene sheets homogeneously for the sample prepared by hydrothermal method (NanoS@G). While for the thermal mixed graphene–sulfur composite (S–G mixture), sulfur shows larger and uneven size (50–200 nm). X-ray Photoelectron Spectra (XPS) reveals the strong chemical bonding between the sulfur nanocrystals and graphene. Comparing with the S–G mixture, the NanoS@G composite shows highly improved electrochemical performance as cathode for lithium–sulfur (Li–S) battery. The NanoS@G composite delivers an initial capacity of 1400 mAh g−1 with the sulfur utilization of 83.7% at a current density of 335 mA g−1. The capacity keeps above 720 mAh g−1 over 100 cycles. The strong adherence of the sulfur nanocrystals on graphene immobilizes sulfur and polysulfides species and suppressed the “shuttle effect”, resulting higher coulombic efficiency and better capacity retention. Electrochemical impedance also suggests that the strong bonding enabled rapid electronic/ionic transport and improved electrochemical kinetics, therefore good rate capability is obtained. These results demonstrate that the NanoS@G composite is a very promising candidate for high-performance Li–S batteries.

Synthesis of porous-carbon@reduced graphene oxide with superior electrochemical behaviors for lithium-sulfur batteries

Preparation and Performance of a Sulfur/graphene Composite for Rechargeable Lithium-Sulfur Battery

Graphene-Li2S-Carbon Nanocomposite for Lithium-Sulfur Batteries

Porous Three-Dimensional Reduced Graphene Oxide for High-Performance Lithium-Sulfur Batteries

Rational In-Situ Construction of Three-Dimensional Reduced Graphene Oxide Supported Li2s/C Composite As Enhanced Cathode for Rechargeable Lithium-Sulfur Batteries

Reduced graphene oxide participation enabling fast nano-homogeneous deposition of sulfur for lithium–sulfur battery cathode

A Graphene Wrapped Hair-Derived Carbon/Sulfur Composite For Lithium-Sulfur Batteries

In Situ Prepared Reduced Graphene Oxide/coo Nanowires Mutually-Supporting Porous Structure with Enhanced Lithium Storage Performance

Synthesis and Electrochemical Performances of Cobalt Sulfides/graphene Nanocomposite As Anode Material of Li-ion Battery

Nitrogen‐Doped Graphene‐Supported Mixed Transition‐Metal Oxide Porous Particles to Confine Polysulfides for Lithium–Sulfur Batteries

Sulfur Nanocrystals Anchored Graphene Composite with Highly Improved Electrochemical Performance for Lithium–sulfur Batteries

One-pot sulfur-containing ion assisted microwave synthesis of reduced graphene oxide@nano-sulfur fibrous hybrids for high-performance lithium-sulfur batteries

Organic polysulfanes grafted on porous graphene as an electrode for high-performance lithium organosulfur batteries

Reduced porous carbon/N-doped graphene nanocomposites for accelerated conversion and effective immobilization of lithium polysulfides in lithium-sulfur batteries

Graphene/Heterojunction Composite Prepared by Carbon Thermal Reduction as a Sulfur Host for Lithium-Sulfur Batteries

Leaf‐Like Graphene‐Oxide‐Wrapped Sulfur for High‐Performance Lithium–Sulfur Battery

Horizontally Aligned Lamellar Porous Graphene/nickel Composite for High Volumetric Capacity Lithium-Sulfur Batteries

Sulfur Synchronously Electrodeposited Onto Exfoliated Graphene Sheets As A Cathode Material For Advanced Lithium-Sulfur Batteries

Nanosulfur/polyaniline/graphene composites for high-performance lithium–sulfur batteries: One pot in-situ synthesis

Macroporous free-standing nano-sulfur/reduced graphene oxide paper as stable cathode for lithium-sulfur battery

Hierarchical High‐Porosity Graphene Oxide‐Porous Carbon/Sulfur Composite with Sodium Chloride As Temporary Space Holders for High‐Performance Lithium‐Sulfur Batteries