Abstract:A newly developed method for the formation of nanowires by self-aggregation of nanoparticles is presented in this paper. Co3C, Co-rich, and Ni nanoparticles dispersed on holey carbon grids are inserted in a vacuum oven and are co-annealed with PolyChloroTriFluoroEthylene (PCTFE) at 375 degrees C. No external electric or magnetic fields were applied. High resolution electron microscopy (HREM) was extensively used to determine the shape, size distribution and crystallographic phase of the starting and produced materials. Interestingly, after an annealing circle of 72 hours, the nanoparticles seem to self-agglomerate into nanowires which have diameters in the 5-20 nm range and lengths exceeding at cases 1 micron. The diameter of the produced wires is in the same range as the diameter of the initial nanoparticles, further supporting the notion that the nanowires have formed out of nanoparticle agglomeration. Close inspection of nanowire HREM images shows that the core structure of nanowires wider than approximately 11 nm resembles linked nanoparticles. Phase identification performed using the HREM images reveals the core is of the same phase/material as the starting nanoparticles. Since nanowires appear to form over holes on the holey carbon grid, a base growth mechanism is proposed. The fluorocarbon vapour decomposes over the transitional metal nanoparticles and carbon tubules start growing. The nanoparticles appear to be trapped inside the tubules where their close proximity enhances their fusion into a continuous core. At the studied temperature, the nanoparticle fusion is seen to be limited by the size of the nanoparticles manifested by continuous cores only in the thin nanowires. The process presented here shows that nanoparticles can spontaneously self-align into nanowires in a way and to an extent never reported before. Therefore there is certainly scope for studying this method further to reveal more information about the catalytic action of transitional metals on hydrocarbons and the exact nanowire formation mechanism. Although it is currently a matter of speculation, this process might lead to the effortless growth of nanowires at particular places when building miniature circuits.

Spontaneous Breaking of Nanowires Between a STM Tip and the Pb(110) Surface

SPONTANEOUS THINNING OF NECKS BETWEEN STM TIP AND THE Pb(110) SURFACE

Void-assisted Plasticity in Ag Nanowires with a Single Twin Structure.

In Situ Observation of High Bending Strain Recoverability in Au Nanowires

Shock-induced Breaking of the Nanowire with the Dependence of Crystallographic Orientation and Strain Rate

Where, and How, Does a Nanowire Break?

Electrical breakdown of nanowires.

Fracture of Cu Nanowire upon Stretch by Atomic Scale Molecular Dynamic Simulation

Electrical Failure Behaviors of Semiconductor Oxide Nanowires

Spontaneous self-agglomeration of magnetic nanoparticles into nanowires

Optically Controllable Nanobreaking of Metallic Nanowires

Shock-Induced Breaking in the Gold Nanowire with the Influence of Defects and Strain Rates

Electrical Breakdown Of Zno Nanowires In Metal-Semiconductor-Metal Structure

Restructuring and Breakup of Nanowires with the Diamond Cubic Crystal Structure into Nanoparticles

Uniaxial Tension-Induced Breaking in the Gold Nanowire with the Influence of Defects and Temperatures

Theoretical Investigation on the Influence of Temperature and Crystallographic Orientation on the Breaking Behavior of Copper Nanowire.

Extending the Capability of Stm Break Junction for Conductance Measurement of Atomic-Size Nanowires: an Electrochemical Strategy

Crystalline liquid and rubber-like behavior in Cu nanowires

Molecular dynamics simulation study on the interfacial contact behavior between single-walled carbon nanotubes and nanowires

Nanowire Breakup via a Morphological Instability Enhanced by Surface Electromigration

On the mechanistic origin of nanoscale "cold welding"