Abstract:The present paper presents an experimental and numerical investigation of the dispersion of the gaseous jet flow and co-flow for the simple unit cell (SUC) and body centered cubic (BCC) configuration of particles in packed beds. The experimental setup is built in such a way, that suitable and simplified boundary conditions are imposed for the corresponding numerical framework. The SUC and BCC particle beds consist of 3D-printed spheres. The flow velocities are analysed directly at the exit of the particle bed, for both beds for particle Reynolds numbers of 200, 300, and 400. Stereo particle image velocimetry (SPIV) is experimentally arranged in such a way, that the velocities over the entire region at the exit of the packed bed are obtained instantaneously. The numerical method consists of a state-of-the-art IBM with AMR. The paper presents the pore jet structure and velocity field exiting each pore for the SUC and BCC packed particle beds. The numerical and experimental studies show a good agreement for the SUC configuration for all flow velocities. For the BCC configuration, some differences can be observed in the pore jet flow structure between the simulations and the experiments, but the general flow velocity distribution shows a good overall agreement. The axial velocity is generally higher for the pores located near the centre of the packed bed than for the pores near the wall. In addition, the axial velocities are observed to increase near the peripheral pores of the packed bed. This behaviour is predominant for the BCC configuration as compared to the SUC configuration. It is shown that both the experiments and the simulations can be used to study the complex fluid structures inside a packed bed reactor.

Numerical Simulation of Convective Heat Transfer in Packed Bed Using Open-Source Computational Fluid Dynamics

Hydrodynamics of New Structured Packings: an Experimental and Micro-scale CFD Study

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

Numerical simulation for character of fluid flow through packed bed

Numerical Simulation of Two-Dimensional Spouted Bed with Draft Plates by Discrete Element Method

Numerical investigation of transient gas–solid heat transfer in a packed bed: Impact of intra-particle thermal diffusion

Experimental and numerical investigation to elucidate the fluid flow through packed beds with structured particle packings

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

Analysis of structures and heat transfer for packed beds

Mixed convective heat transfer characteristics and mechanisms in structured packed beds

DEM-CFD Simulation Analysis of Heat Transfer Characteristics for Hydrogen Flow in Randomly Packed Beds

Validation of a novel open-source work-flow for the simulation of packed-bed reactors

Pore scale numerical simulation of flow and heat transfer non-equilibrium in randomly packed bed

Pore-to-mesoscale Network Modeling of Heat Transfer and Fluid Flow in Packed Beds with Application to Process Design

2d Thermal Lattice-Boltzmann Approach For Forced Flow And Convective Heat Transfer Through Packed Beds With Impermeable Bounding Surfaces

The effect of particle arrangement on the direct heat extraction of regular packed bed with numerical simulation

Effect of Bed Thickness on a Pseudo 2D Gas-Solid Fluidized Bed Turbulent Flow Structures and Dynamics

A unified approach to the convective heat transfer in packed beds

Multi-scale simulation of turbulence and heat transfer characteristics in randomly packed beds

Particle-resolved simulations and measurements of the flow through a uniform packed bed

CFD-DEM Simulation of Heat Transfer in Fluidized Beds: Model Verification, Validation, and Application