Abstract:The strength and integrity of a structure depends not only on the quality of its materials but also the health condition of its different components. In some cases, damage cracks inside the structural will be generated from excessive loads, and if these damage cracks go undetected for a long period, catastrophic failure of structures may occur. However, most of the damages at early stages are minor and difficult to detect by visual inspection. Therefore, this paper proposes a damage estimation algorithm based on unscented Kalman filter (UKF), which can identify and locate the damage parameters in real time with a limited number of sensors. Meanwhile, this algorithm is also applicable to the structural system with unknown external inputs, and can make the joint force-damage estimation. For most structures, the damage parameters are sparse in space, therefore, the sparsity of the damage parameter vector is introduced to UKF as an l1-norm constraint by the pseudo- measurement (PM) technique. Thus, unconstrained optimization of the damage parameter estimation is transformed into an l1-norm constrained optimization problem. With such improvement, the process of damage parameter estimation converges faster and the false damage parameters are effectively restrained. Moreover, in order to solve the force drift problem during force identification when only acceleration data is used, the sparse constraint of the force vector is also introduced to UKF framework by the PM technique. Finally, numerical simulations of a ten-story shear building and experiments of a three-story shear structure are used to demonstrate the performance of the proposed algorithm. The results indicate that this algorithm can achieve an accurate estimation of damage and can successfully resolve the common force drift problem.

Static Load Identification of Nonlinear Structure Based on Internal Force Estimation Exemplified by Underground Straight-Wall Arch Structure

Instability Mechanism of Shallow Tunnel in Soft Rock Subjected to Surcharge Loads

DYNAMIC TEST OF INTERFACE STRESS DISTRIBUTION ON A BURIED STRAIGHT-WALL ARCH STRUCTURE SUBJECTED TO BLAST LOADS

An Analytical Method for Predicting Load Acting on Geosynthetic Overlying Voids

Structural damage identification with unknown external inputs based on the sparse constraint

Load Calculation Method for Deep-Buried Layered Soft Rock Tunnel Based on Back-Analysis of Structural Deformation

Computer Simulation of Dynamic Brittle Damage Process in Arch Dam Due to Blast Load

Moving Force Identification Based on Load Shape Function for a Long-Span Bridge Structure

An efficient and robust method for structural distributed load identification based on mesh superposition approach

RESIDUAL DYNAMIC RESISTANCE ASSESSMENT OF SEISMIC DAMAGED UNDERGROUND ARCH UNDER NON-UNIFORM EXPLOSION LOADING

Non-contact impact load identification based on intelligent visual sensing technology

Structural nonlinear damage identification based on the information distance of GNPAX/GARCH model and its experimental study

Dynamic Damage Process of an Underground Protective Structure Subjected to Impact Loading

A Novel Axial Load Inversion Method for Rock Bolts Based on the Surface Strain of a Bearing Plate

Structural damage identification through unscented Kalman inversion with l1-norm regularization

Dynamic responses of buried arch structure subjected to subsurface localized impulsive loading: Experimental study

Structural damage identification using additional virtual masses

Elastic Responses of Underground Circular Arches Considering Dynamic Soil-Structure Interaction: A Theoretical Analysis

Investigation On Single Tube Cfst Arch Models By Modeling Structural Stressing State Based On Nsf Method

Structural damage identification using additional virtual supports

Research on Damage Identification of Arch Bridges Based on Deflection Influence Line Analytical Theory