Simulation of the effect of flow channel structure on the performance of PEM electrolyzer

WANG Hua,MA Xiaofeng,HE Yong,XU Chaoqun,ZHU Yanqun,WANG Zhihua

DOI: https://doi.org/10.13226/j.issn.1006-6772.H23010901

2023-01-01

Abstract:In order to improve the performance of proton exchange membrane（PEM） electrolyzer, reduce the voltage loss, and enhance the operational stability, a three-dimensional model of a full-size multi-channel PEM electrolyzer was established using Comsol software under certain assumptions. the simulation calculation results were compared with the experimental test results of the same size PEM electrolyzer in the literature to verify that the simulation results were basically consistent with the experimental test results in the literature. The effects of runner height, blocking and ridge width on the performance of PEM electrolyzer were investigated to optimize the flow field structure based on this electrolyzer model. The simulation results show that the optimal flow channel height is 2 mm under the PEM electrolyzer size set in the study. The oxygen mass fraction in the diffusion layer can be reduced by about 2.6%, the average temperature of the membrane electrode can be reduced by about 2.2 K, and the electrolytic potential of the electrolyzer can be reduced by about 0.023 5 V by setting the block at the top of the flow channel. When the width of the ridge of the flow field is reduced from 2 mm to 1 mm, the average oxygen mass fraction is decreased by about 8.7%, the average temperature of the membrane electrode is decreased by 6.21 K, and the electrolytic potential of the electrolyzer is decreased by about 0.04 V. The optimized flow field structure is conducive to take away oxygen in the diffusion layer for circulating water, and reduce the possibility of oxygen bubbles blocking the pores of the diffusion layer, reduce the mass transfer resistance, and enhance the heat transfer process to discharge the excess heat from the electrolyzer in time, reduce the electrolytic potential of the electrolyzer, and improve electrolyzer performance and operational stability.