Abstract:Arsenic-containing sludge (ABG) is a common hazardous waste in the metallurgical industry and poses a serious threat to environmental safety. However, its instability and mobility have a significant impact on the environment. Traditional curing methods are time-consuming and costly, often resulting in incomplete curing. In this study, we introduce a curing/stabilisation method with a steel slag-fly ash gel material after ABG acid treatment. The toxic leaching of arsenic from ABG was reduced to 220 mg/kg by treating the sludge with acids (H 2 SO 4 -H 3 PO 4 ) at different solid-to-liquid ratios. Afterward, H 2 O 2 was added to oxidise As(III) to As(V). The ABG was cured/stabilised using an alkali-activated steel slag-fly ash gel material. The cured product exhibited optimal arsenic fixation under an ABG/steel slag/fly ash mass ratio of 1:4:2, a curing temperature of 60°C, a curing time of 20 h, and an ambient pH of 12.5. Under these conditions, steel slag-fly ash facilitated Ca-As precipitation, resulting in a hydration reaction that produced C-S-H gel. Additionally, the reaction generated calcium hydroxide, calcium and iron pyroxene, silica, and iron ferrite, which adsorbed part of the free arsenic, completing the curing of the acid-treated ABG and stabilising arsenic leaching toxicity. The leaching of arsenic in the ABG was much lower than the Chinese 'Hazardous Wastes Leaching Toxicity Identification Standard' (GB5085.3-2007) (5 mg/L), with an arsenic curing rate exceeding 99%. The mechanism of arsenic solidification involves the combined effects of chemical precipitation, physical encapsulation, and adsorption. Collectively, our findings demonstrated that the use of steel slag-fly ash gel as a functional material for ABG curing holds considerable environmental and economic benefits. Therefore, this study provides theoretical guidance and provides insights into the experimental feasibility of ABG treatment.

Leaching of arsenic from flue gas desulphurisation gypsum using ultrasound-enhanced sulfuric acid

A Comparative Study on Stabilization of Available As in Highly Contaminated Hazardous Solid Waste.

Effect of Fe3+ concentration and pH on arsenic removal, migration and speciation transformation in lab-scale wet flue gas desulfurization system

Ultrasound-Assisted Selective Leaching of Arsenic from Copper Smelting Flue Dust

Transformation of Arsenic During Realgar Tailings Stabilization Using Ferrous Sulfate in a Pilot-Scale Treatment.

Ultrasonic-enhanced selective arsenic removal and sulfide conversion from iron slag

Disposal of high-arsenic waste acid by the stepwise formation of gypsum and scorodite

An all-in-one strategy for resource recovery and immobilization of arsenic from arsenic-bearing gypsum sludge

Efficient stabilization of arsenic in the arsenic-bearing lime-ferrate sludge by zero valent iron-enhanced hydrothermal treatment

Detoxification and Reclamation of Hydrometallurgical Arsenic- and Trace Metals-Bearing Gypsum Via Hydrothermal Recrystallization in Acid Solution.

Removal and immobilization of arsenic from copper smelting wastewater using copper slag by in situ encapsulation with silica gel

Comprehensive Effect of Oxidant Addition in an FGD Slurry on the Removal and Distribution of Selenium: A Field Study.

Minimization and stabilization of smelting arsenic-containing hazardous wastewater and solid waste using strategy for stepwise phase-controlled and thermal-doped copper slags

Evaluation of hydroxyapatite derived from flue gas desulphurization gypsum on simultaneous immobilization of lead and cadmium in contaminated soil

Solidification and Release Characteristics of Heavy Metals in Gypsum from Coal-Fired Power Plants

Selective Removal of Arsenic from Copper Smelting Flue Dusts by Alkaline Thiourea Leaching

Hydrothermal treatment of arsenic sulfide slag to immobilize arsenic into scorodite and recycle sulfur

Co-treatment of copper smelting flue dust and arsenic sulfide residue by a pyrometallurgical approach for simultaneous removal and recovery of arsenic

Preparation of calcium carbonate by indirect carbonation desulfurization gypsum with renewable aspartic acid

Characterisation of arsenic levels in acid-treated arsenic-containing sludge after steel slag-fly ash gel curing

Characterization of Hg-0 Re-Emission and Hg2+ Leaching Potential from Flue Gas Desulfurization (fgd) Gypsum