Abstract:In high power impulse magnetron sputtering (HiPIMS) discharge, the cathode sheath is a particularly vital section which determines the spatial distribution of electric field and the energy and transport of charged particles. In this work, a single Langmuir probe is employed to explore the effects of dynamic cathode sheath on electron transport at the initial period of HiPIMS pulse. Measurements show that the electron temperature is as high as ~20 eV and the plasma density is much lower than ~1015–1016 m−3 at the beginning of HiPIMS pulse t < 3 μs; correspondingly, a feature of small low-energy amplitude and extended high-energy tail is found in the electron energy distribution function (EEDF). And the high-energy electrons can escape the magnetic trap and gradually diffuse to further axial positions, even to z = 140 mm with only several microseconds delay. The diffusion coefficient of electrons D⊥ is larger than the typical Bohm diffusion at z > 32 mm in our discharge case. The two-dimension Particle-in-cell Monte Carlo collision (2D PIC-MCC) simulation results are well in agreement with the experimental results. The net positive charge density ∆n near the target is lower than ~+9.2×1014 m−3 at t = 0.5 μs, and the charge separation is up to ~0.4. In this case, the cathode sheath has a large thickness and the axial electric field EZ outside the sheath is as strong as dozens of 10 kVm−1. The simulation results confirm, for the case of the expanding sheath, (i) the electrons can be accelerated and escape the magnetic trap with weak constraint; (ii) the electron group can maintain their kinetic energy when they diffuse from the ionization region (IR) to bulk plasma (BP). When the net charge density increases to ~+3×1016 m−3 at t = 2.5 μs, the sheath thickness is condensed to ~1 mm with ~600 V voltage drop.

Particle Simulation of Near-Cathode Sheath in Vacuum Arc

Particle-in-cell and Monte Carlo Collision Simulations of the Cathode Sheath in an Atmospheric Direct-Current Arc Discharge

Two-dimensional kinetic simulation of plasma dynamics in the post-arc stage of vacuum circuit breakers

Simulating vacuum arc initiation by coupling emission, heating and plasma processes

Development of Numerical Analysis Method for Cathode Sheath Considering Electron Emission From Cathode in Vacuum Arc

Effect Of A Near-Cathode Sheath On Heat Transfer In High-Pressure Arc Plasmas

Transient modelling and simulation of the forced arc extinguish period of the circuit breakers

Modeling and Simulation of Vacuum Arc Plasma Transport Properties Under the Influence of Anode Melting Pool

Simulation of Arc Characteristics in Miniature Circuit Breaker

A 2-D Axisymmetric Magneto-Hydrodynamic Model of a DC Arc Plasma Torch and Its Solution Methodology

An alternative simulation approach for surface flashover in vacuum using a 1D2V continuum and kinetic model

A Distributed Carbon Cathodic Vacuum Arc

Influence of residual plasma drift velocity on the post-arc sheath expansion of vacuum circuit breakers

Simulation on multi-species vacuum arc considering both ionization-recombination and species diffusion processes

Finite volume simulation of arc: pinching arc plasma by high-frequency alternating longitudinal magnetic field

Influence of the vapor shield potential control on the post-arc sheath development in vacuum interrupters

Modeling on plasma energy balance and transfer in a hollow cathode

Effects of the dynamic cathode sheath on electron transport at the initial period of HiPIMS pulse studied by Langmuir probe measurements and 2D PIC-MCC simulation

Numerical Simulation of Plasma Plume with an Insulated Wall in Sheath Region Using a DSMC-PIC Parallel Algorithm

Non-equilibrium Modelling of Free-Burning Argon Arc in Different Anode Sheath Regimes