Abstract:China Spallation Neutron Source(CSNS) beam power will upgrade to 500 kW(CSNS-II), energy gain of H- linac will up to 300 MeV from 80 MeV, and the 648 MHz βg=0.6 5-cell superconducting elliptical cavity will be adopted to accelerate the H- from 150 to 300 MeV. Accompanied with the advantage of high accelerating gradient, simple structure, easy post-processing, weak stiffeness and detuning is the shortcoming of elliptical cavity, this study analysis detuning characteristic of the elliptical cavity. With code COMSOL Multiphysics, helium pressure sensitivity coefficient KP and lorentz force detuning factor KL of bare cavity was calculated under two end fixed conditions, KP=–45.705 Hz/mbar(1 mbar=100 Pa) and KL=1.574 Hz/(MV/m)2. Stiffener ring was designed and optimized to reduce the Helium pressure sensitivity coefficient and lorentz force detuning factor, and double ring was chosen to improve the detuning of elliptical cavity at last by vast calculation and analysis, the position of stiffener ring was optimized at 75 and 120 mm under two end fixed boundary, Helium pressure sensitivity coefficient drop down to KP=6 Hz/mbar, lorentz force detuning factor drop down to KL=0.43 Hz/(MV/m)2. Moreover, elastic boundary was used to analyze helium pressure sensitivity coefficient and lorentz force detuning factor, more realistic results were got under tuner end 30 kN/mm boundary and the other end fixed condition, KP=4.8 Hz/mbar and KL=1.99 Hz/(MV/m)2, meet engineering requirements. In addition, dynamic lorentz force detuning was analyzed qualitatively with code CST. And natural frequency of cavity was calculated by code Workbench, results show that nature frequency is far from RF pulse repetition rate and ambient vibration frequency, no resonance happen.

Design and Thermal Analysis of a High-power Faraday Cup for CSNS-Ⅱ

The design and construction of CSNS drift tube linac

Thermal analysis and cooling structure design of the primary collimator in CSNS/RCS

Thermal Design of a Spallation Neutron Source System

Preliminary Study of the High Temperature Superconducting Solution for 2 GeV CW FFAG Magnet

Design of the Input Power Coupler for Boron Neutron Capture Therapy Drift Tube Linac

Thermal-Hydraulic Analysis Of Concept Design Of Spallation Target In Chinese Accelerator Driven Subcritical System

Thermal Analysis for Wire Scanners in the CSNS Linac

Thermal Hydraulic Analysis of China Spallation Neutron Source Target System Under Abnormal Situations

Preliminary Design of CSNS-II Linac SRF LLRF

Detuning Analysis of the Superconducting Elliptical Cavity for CSNS-Ⅱ Linac

Thermal Performance Analysis and Operation of the Spoke Cavity Cryomodules for C-ADS Injector-I

Updating the CSNS injector linac to 250 MeV with superconducting double-spoke cavities

Study on collimation and shielding of the back-streaming neutrons at the CSNS target

The Design and Initial Testing of the Beam Phase and Energy Measurement System for DTL in the Proton Accelerator of CSNS

Frequency detuning analysis of drift tube linac for CSNS

Design and Analysis of the Thermal Shield of the Prototype Superconducting Dipole Magnet for GSI

Thermal-Hydraulic Analysis of Spallation Target in Accelerator Driven Sub-critical System

Development of the double spoke cavity prototype for CSNS-II

Conceptual Design of Target Station and Neutron Scattering Spectrometers for the Chinese Spallation Neutron Source

Thermal-Hydraulic Analysis of PDS-XADS Spallation Target