Visualization of R134a cavitation flow in a rectangle Venturi tube and determination of thermal effects with cavity length and thickness
Xufeng Fang,Liang Chen,Beile Zhang,Rong Xue,Tianwei Lai,Shuangtao Chen,Yu Hou
DOI: https://doi.org/10.1016/j.expthermflusci.2023.111014
IF: 3.2
2023-01-01
Experimental Thermal and Fluid Science
Abstract:In order to study R134a cavitation behavior in a rectangle Venturi tube, high-speed photography combined with pressure, flow rate, and temperature measurements are performed to visualize the cavitation process and determine the cavity thickness and length through the tube in a closed-loop test system. The experimental results indicated that incipient cavitation of R134a is observed at the entrance of the tube throat when the cavitation number is below 2.50, regardless of the inlet temperature and pressure. The normalized cavity length is correlated with the cavitation number, and a critical cavitation number of 1.766 is defined to connect two linear functions. The throat and tail cavity thickness can be fitted as a cubic polynomial function with the cavitation number, and a transition cavitation number of 2.00 divides the growth rate of the thickness with the decrease of the cavitation number into fast and slow-growing parts. The temperature drop measured at the throat of the Venturi tube can be fitted to a cubic polynomial function about the cavitation number. Under the same cavitation number, the temperature drop decreases with the increase of the flow temperature. The B-factor can be fitted as a cavitation number quadratic polynomial function and a linear function of the tail cavity thickness. The transition cavitation number is defined by the transition point of the growth rate of the above function. The empirical correlation of B-factor is modified based on the throat and tail cavity thickness, and the cavitation thermal effect of R134a is accurately predicted. Combined with the inception cavitation number, the transition cavitation number, and the critical cavitation number, the shape of the cavity is divided into four regions: inception cavitation, attached cavitation, supercavitation, and fusion cavitation. The fast Fourier transformation analysis shows that the cavitation flow of R134a gradually changes from periodic flow to fully developed unsteady flow with the decrease of cavitation number.