Abstract:Purpose The paper aims to clarify the distribution of excess pore pressure during cone penetration in two-layered clay and its influence on penetrometer resistance. Design/methodology/approach An arbitrary Lagrangian–Eulerian scheme is adopted to preserve the quality of mesh throughout the numerical simulation. Simplified methods of layered penetration and coupled pore pressure analysis of cone penetration have been proposed and verified by previous studies. The investigation is then extended by the present work to study the cone penetration test in a two-layered clay profile assumed to be homogeneous with the modified Cam clay model. Findings The reduction of the range of pore pressure with decreasing PF will cause a decrease of the sensing distance. The PF of the underlying soil is one of the factors that determine the development distance. The interface can be obtained by taking the position of the maximum curvature of the penetrometer resistance curve in the case of stiff clay overlying soft clay. In the case of soft clay overlying stiff clay, the interface locates at the maximum curvature of the penetrometer resistance curve above about 1.6D. Research limitations/implications The cone penetration analyses in this paper are conducted assuming smooth soil-cone contact. Originality/value A simplified method based on ALE in Abaqus/Explicit is proposed for layered penetration, which solves the problem of mesh distortion at the interface between two materials. The stiffness equivalent method is also proposed to couple pore pressure during cone penetration, which achieves efficient coupling of pore water pressure in large deformations.

Study of Cone Penetration Test in Granular Soil Considering Realistic Particle Shapes by Discrete Element Method in 3D

Discrete Element Modeling of Polyhedral Representation of Granular Materials

Discrete Element Simulations of Drained Granular Material Response under Multidirectional Rotational Shear

Particle Shape Effects on the Shear Behaviors of Granular Assemblies: Irregularity and Elongation

Discrete element model (DEM) simulations of cone penetration test (CPT) measurements and soil classification

Numerical simulation of cone penetration test by using CFD–DEM coupled analysis

FEM-DEM Coupled Modeling of Cone Penetration Tests in Lunar Soil

Discrete element modelling of rotary CPT and its applications

A numerical investigation on the effect of rotation on the Cone Penetration Test

Discrete element modelling of thermal penetration test with heating and cooling

KEY TECHNIGUES STUDY OF PARTICLE FLOW SIMULATION FOR THREE-DIMENSIONAL HOLLOW TORSIONAL SHEAR TEST

3D DEM Simulations and Experiments on Spherical Impactor Penetrating into the Elongated Particles

Three-dimensional morphological characteristics of particles in nature and its application for DEM simulation

Numerical evaluation of particle shape effect on small strain properties of granular soils

Tip angle dependence for resistive force into dry granular materials at shallow cone penetration

Friction anlysis of large diameter steel cylinder penetration process using 3D-DEM

DEM numerical test method for granular matter under complex 3D loading

Effects of particle gradation and geometry on the pore characteristics and water retention curves of granular soils: a combined DEM and PNM investigation

Experimental and Numerical Study of Rate Effect in Cone Penetration Tests

Coupled pore pressure analysis of cone penetration test in two-layered clay

Unified discrete‐element approach applying arbitrary undrained loading paths in element testing for granular soils