Abstract:A new phase field model is proposed through introducing the mixed-mode critical energy release rate (ERR) following the power-law relation as the crack driving force. Compared with the classical phase field models involving only mode-I critical ERR G(IC), the present phase field model takes mode-II critical ERR G(IIC) into account and introduces two power-law factors. As a result, a pure mode-II crack propagation can be observed in the present simulation of a single material under shear loading when the mode-I critical ERR is significantly larger than the mode-II one. A phase field simulation on a symmetric three-point bending semi-circular Brazilian disc specimen of polymethylmethacrylate shows that a better agreement with experimental results can be achieved through adjusting the power-law factors. Then, a shear test of a single edge notched plate is simulated and the results show that: (i) The peak load decreases gradually as either power-law factor increases. (ii) The mixity factor (G(IIC)/G(IC)) affects not only the cracking mode but also the brittle or tough extent. With the increase of the mixity factor, the initial crack deflection angle converges to a constant value of (70.8 +/- 0.5), which is close to 70.5 predicted by the classical maximum tangential stress criterion. (iii) The energy split methods have an obvious effect on the crack propagation behaviors. For the volumetric-deviatoric split method, a pure mode-II crack propagation is observed when the mixity factor approaches zero and a pure mode-I crack propagation occurs when the mixity factor is no less than 4.0. For the spectral decomposition split method, a mode-I crack propagation always occurs regardless of the mixity factor. To summarize, with the change of the power-law factors and critical ERRs, diverse cracking modes can be predicted by the present phase field model.

Determination of Mode-Ii Critical Energy Release Rate Using Mixed-Mode Phase-Field Model

An Experiment-Simulation Method for the Determination of the Mode-II Critical Energy Release Rate

A Phase Field Model with the Mixed-Mode Driving Force of Power-Law Relation

Phase-field method with additional dissipation force for mixed-mode cohesive fracture

A Mode-Adjustable Phase-Field Model for Brittle Fracture by Regulating Distortional Crack Driving Energy

A Calculation Method for the Mode II Fracture Energy Release Rate of Dissimilar Materials Adhesively Bonded Structures

Assessing critical fracture energy in mode I for bonded composite joints: A numerical–experimental approach with uncertainty analysis

A novel and simple variationally-consistent phase-field cohesive zone model for mixed-mode fracture

Mixed-Mode Fracture Investigation of Pmma with Initial Single/Double Crack(S) Interference Using Phase-Shifted Coherent Gradient Sensing Method

A Generalized Maximum Energy Release Rate Criterion for Mixed Mode Fracture Analysis of Brittle and Quasi-Brittle Materials

How to Obtain a More Accurate Maximum Energy Release Rate for Mixed Mode Fracture

Study on Elastic Mixed Mode Fracture Behavior and II-III Coupling Effect

A three-field phase-field model for mixed-mode fracture in rock based on experimental determination of the mode II fracture toughness

A practical testing approach to determine mode II fracture energy GIIF for concrete

A Hybrid Approach to Determine Fracture Resistance for Mode I and Mixed-Mode I and Ii Fracture Specimens

Mixed-mode fracture: Combination of Arcan fixture and stereo-DIC

A Strain Energy-Based Parameter for Predicting the Crack Initiation Angle of Mixed Mode Fracture

A Modified 3D G-criterion for the Prediction of Crack Propagation under Mixed Mode I-III Loadings

Comparison of Mixed Mode Fracture Criteria in Finite Element Analysis for Matrix Crack Density Estimation of Laminated Composites

Study of Fracture Criterion under Mixed Mode Conditions

3D-generalized maximum tangential strain criterion for predicting mixed-mode I/II/III fracture initiation of brittle materials considering T-stress effects