Abstract:Cracks in rock and concrete have a great adverse effect on the stability of engineering structures; however, there are few studies on X-shaped fissures which widely exist in rock and concrete structures. Based on this background, three-point bending fracture tests of SCB specimens containing X-shaped fissures are carried out. The momentum equations in the SPH method are improved, and the crack propagations of SCB specimens under three-point bending are simulated. The results show that cracks grow simply along the vertical direction in the sample with no X-shaped fissures, and the existence of an X-shaped fissure changes the crack growth path and final failure modes of the SCB samples. The crack propagation simulation results are consistent with the experimental results, which verifies the rationality of the improved SPH method. The load–displacement curves mainly present three typical stages: the initial compaction stage, linear elastic deformation stage, and failure stage. The peak load decreases first then increases with an increase in eccentricity. With an increase in X-shaped fissure length and decrease in X-shaped fissure angle, the peak load decreases. The damage counts remain at 0 at the initial loading stage, corresponding to the initial compaction stage and the linear elastic deformation stage, and increase sharply at the later loading stage, corresponding to the failure stage, which is consistent with the experimental results. The influence mechanisms of X-shaped fissures on the crack propagation paths are discussed; the existence of different X-shaped fissure morphologies aggravate the tensile stress concentration at specific positions, leading to different crack propagation modes in the experiments. The research results can provide a certain reference for understanding the failure mechanisms of engineering structures containing X-shaped fissures and promote the applications of the SPH method into the simulations of cross-fissure crack propagations.

Finite Element-Based Phase Field Simulation of Complex Branching Crack Propagation under Different Loads

Research on Crack Propagation of 3D Printed Material with Complex Cracks Based on the Phase-Field Fracture Model

Phase-Field-Crystal Modeling for Crack Propagation and Branch of Materials

Phase field modeling of crack propagation in structures under tensile stress

Phase-field-crystal Simulation of Nano-Single Crystal Microcrack Propagation under Different Orientation Angles

Modeling the Propagation of a Prefabricated Brittle Crack Using Phase-field Method Within the Framework of ABAQUS

Phase field simulation of fatigue crack propagation under complex load situations

Investigating the Effects of Diverse Cavity Morphologies on the Mechanism of Tensile Crack-Induced Collapse: A Phase Field Method Approach

Experimental and Meshless Numerical Simulations on the Crack Propagation of Semi-Circular Bending Specimens Containing X-Shaped Fissures Under Three-Point Bending

Numerical Study on Crack Propagation in Linear Elastic Multiphase Composite Materials Using Phase Field Method

Crack Curving and Branching Mechanism Induced by Hard Grain Under Dynamic Loading

An adaptive phase-field model based on bilinear elements for tensile-compressive-shear fracture

A Homogenization-Based Phase Field Approach to Fracture with Explicit Dependence on Local Crack Orientation

Numerical Analysis of Crack Propagation Path Using an Advanced Element Cracking Method

Anisotropic Damage Evolution in Solid Fractures: A Novel Phase Field Approach with Multiple Failure Criteria and Directional-Dependent Structural Tensor

Numerical investigation of dynamic crack branching under biaxial loading

Study on Crack Curving and Branching Mechanism in Quasi-Brittle Materials under Dynamic Biaxial Loading

Crack nucleation and propagation simulation in brittle two-phase perforated/particulate composites by a phase field model

Phase-field Fracture Modeling for Creep Crack

Study the Dynamic Crack Path in Brittle Material under Thermal Shock Loading by Phase Field Modeling

Phase field modeling of crack propagation under combined shear and tensile loading with hybrid formulation