Abstract:Strong yet ductile alloys have long been desired for industrial applications to enhance structural reliability. This work produced two (CoCrNi)93.5Al3Ti3C0.5 medium-entropy alloys with exceptional strength–ductility combinations, via short/medium (3 min/30 min) annealing times after hot-rolling. Three types of intergranular precipitates including MC, M23C6 carbides, and L12 phase were detected in both samples. Noticeably, the high-density of intragranular L12 precipitates were only found in the medium-time annealed sample. Upon inspection of the deformed substructure, it was revealed that the plane slip is the dominant deformation mechanism of both alloys. This is related to the lower stacking fault energy, higher lattice friction induced by the C solute, and slip-plane softening caused by intragranular dense L12 precipitates. Additionally, we noted that the stacking fault and twinning act as the mediated mechanisms in deformation of the short-time annealed alloy, while only the former mechanism was apparent in the medium-time annealed alloy. The inhibited twinning tendency can be attributed to the higher energy stacking faults and the increased critical twinning stress caused by intragranular dense L12 precipitates. Our present findings provide not only guidance for optimizing the mechanical properties of high/medium-entropy alloys, but also a fundamental understanding of deformation mechanisms.

Exceptional Strain-Hardening Capacity of a Medium-Entropy Alloy CoCrNi with Grain-Size Gradient Structure

Inherent and Multiple Strain Hardening Imparting Synergistic Ultrahigh Strength and Ductility in a Low Stacking Faulted Heterogeneous High-Entropy Alloy

Hierarchical Grain Size and Nanotwin Gradient Microstructure for Improved Mechanical Properties of a Non-Equiatomic CoCrFeMnNi High-Entropy Alloy

Ultra-fine Grained Structure and High-Content Precipitates Enable Ultrastrong Yet Strain-Hardenable Medium-Entropy Alloy

A superior combination of strength-ductility in CoCrFeNiMn high-entropy alloy induced by asymmetric rolling and subsequent annealing treatment

In-situ Formed Heterogeneous Grain Structure in Spark-Plasma-sintered CoCrFeMnNi High-Entropy Alloy Overcomes the Strength-Ductility Trade-off

Exceptional Strength–Ductility Combinations of a CoCrNi-Based Medium-Entropy Alloy via Short/Medium-Time Annealing after Hot-Rolling

Dynamically reinforced heterogeneous grain structure prolongs ductility in a medium-entropy alloy with gigapascal yield strength

Twin-induced transformation strengthening of CoCrNi-based medium-entropy alloy with a gradient nanostructure

Superb Strength-Ductility Synergy in a Medium-Entropy CoCrNi Alloy Via Reinforced TRIP Effect

Strong and ductile CrCoNi medium-entropy alloy via dispersed heterostructure

Exceptional high-strain-rate tensile mechanical properties in a CrCoNi medium-entropy alloy

Enhanced tensile properties by heterogeneous grain structures and coherent precipitates in a CoCrNi-based medium entropy alloy

Enhanced strength-ductility synergy in a Ta-doped CoCrNi medium-entropy alloy with a dual heterogeneous structure

A novel nanostructure to achieve ultrahigh strength and good tensile ductility of a CoCrFeNiMn high entropy alloy

Gradient nanotwinned CrCoNi medium-entropy alloy with strength-ductility synergy

Abnormal strain-hardening in Co-rich CoNiV medium-entropy alloys

Tensile behaviors and hetero-deformation-induced hardening mechanisms in medium entropy alloys with dual gradients of grain size and coherent nanoprecipitate

Strengthening CoCrNi medium-entropy alloy by tuning lattice defects

Partially Recrystallized Heterostructure Via Mo-doping Endows CoCrNi Medium-Entropy Alloy with Exceptional Strength and Ductility

Strengthening mechanism of CrCoNi medium-entropy alloy from the partially recrystallized structure to the fully recrystallized heterogeneous structure