Abstract:Dynamics of exchange within vitrimer networks are influenced by mobility of the chemical species involved in the exchange reaction, then it can be affected by the crystalline phase when boronic ester bond is introduced into the thermoplastic elastomers with crystalline phase as physical cross-links. In this work, the dynamic dioxaborolane cross-links were introduced into commercial poly(ethylene-α-octene) (POE) with crystalline phases as physical cross-links to prepare POE vitrimers. The results of stress relaxation show that relaxation time (τ) follows an Arrhenius law with the temperature at the melting range for not only POE vitrimers and thermally treated POE vitrimers with dynamic cross-links, but also neat POE with purely physical cross-links. The liquid-to-solid transition temperature can raise to 35.3 °C for POE vitrimers from -42.9 °C of the thermally treated one, due to the constrained mobility by residual crystalline phases. The resulted POE vitrimers maintain a stress at break of higher than 27.5 MPa and an elongation at break of higher than 800% at room temperature. With the temperature increasing, the crystal melting induced weakening of the physical cross-linking in POE decreases the strength, but the storage modulus and the stress at 300% and 500% elongation of POE vitrimers are improved. The properties of POE vitrimers can almost keep unchanged after recycling or healing. All these results show that the introduction of reversible boronic ester bonds is a promising strategy to improve the performances and recyclability of physically cross-linked POE materials.

Crosslinking of poly(ethylene-co-vinyl alcohol) with diphenylboronic acid of tetraphenylethene enables reprocessing, shape recovery and photoluminescence

Oxidative Upcycling of Polyolefin Wastes into the Dynamically Cross-Linked Elastomer

High-Performance Olefin Thermoplastic Elastomer Based on Dynamically Cross-Linking Crystalline Macromers and Elastic Backbones

Vitrimers of polyolefin elastomer with physically cross-linked network

Reprocessability of Dynamic Polydioxaborolane Networks Activated by Heat, Moisture and Mechanical Force

Preparation, Curing Properties, and Phase Morphology of Epoxy-Novolac Resin/multiepoxy-Terminated Low-Molecular-weight Poly(phenylene Oxide) Blend

Photoinitiated Crosslinking of Ethylene-Vinyl Acetate Copolymers and Characterization of Related Properties

Recycling of Polydicyclopentadiene Enabled with N-Coordinated Boronic Ester Bonds

Reprocessed and shape memory networks involving poly(hydroxyl ether ester) and polydimethylsiloxane through Diels-Alder reaction

Crosslinking of low density polyethylene with octavinyl polyhedral oligomeric silsesquioxane as the crosslinker

Crosslinking of Polyethylene with Polysilsesquioxane Via Carbamate Linkages: Synthesis, Shape Recovery, and Reprocessing Properties

Dynamically Cross-Linked Polyolefin Elastomers with Highly Improved Mechanical and Thermal Performance

Epoxy vitrimer based on borate ester bond for green degradation, closed-loop recycling, and ready reprocessing

Toughened and Recyclable Epoxy Networks Featuring Nanostructures and Dynamic Covalent Bonds

Elastomeric polyolefin vitrimer: Dynamic imine bond cross-linked ethylene/propylene copolymer

Itaconic acid-based hyperbranched polymer toughened epoxy resins with rapid stress relaxation, superb solvent resistance and closed-loop recyclability

The influence of dynamic crosslinked topology and bond exchange on thermal properties, viscoelasticity, and foaming behavior of multibranched TPEE vitrimer

Reinforcing and Toughening Modification of poly (3-hydroxybutyrate-co-3-hydroxyvalerate)/ethylene-vinyl Acetate Copolymer (PHBV/EVA) Blends Compatibilized by Benzoyl Peroxide

Selectively Cross-Linked Poly (Lactide)/ethylene-Glycidyl Methacrylate-Vinyl Acetate Thermoplastic Elastomers with Partial Dual-Continuous Network-Like Structures and Shape Memory Performances

Biobased Poly(lactide)/ethylene-co-vinyl Acetate Thermoplastic Vulcanizates: Morphology Evolution, Superior Properties, and Partial Degradability

A Cross-linked Polyethylene with Recyclability and Mechanical Robustness Enabled by Establishment of Multiple Hydrogen Bonds Network via Reactive Melt Blending