Abstract:In this study, epoxy‐terminated hyperbranched polyester (EHBP) was synthesized by epoxy‐terminated modification of hyperbranched polyester, which cross‐links poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV), and polycaprolactone (PCL) via epoxy‐terminated ring‐opening, while hydroxyl‐terminated groups form hydrogen bonding effect with PHBV and PCL. Together, they improved the toughness and compatibility of PHBV and PCL. Melt extrusion process was followed in order to improve the high crystallinity and poor toughness of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) blend materials. It was achieved by the incorporation of epoxy‐terminated hyperbranched polyester (EHBP) elastomer into PHBV and polycaprolactone (PCL). EHBP cross‐links PHBV and PCL through ring‐opening polymerization of epoxy‐terminated and carboxyl groups. The mass percentages of EHBP in the PHBV/PCL blends are 1, 2, 3, and 4mass%, which are expressed as 1, 2, 3, and 4 phr in the following text. Therefore, when the EHBP content was 3 phr, the Young's modulus and tensile strength of the blends are increased to 750 and 15 MPa, respectively, which was comparable to the biodegradable polymers used for packaging. Simultaneously, compatibility between PHBV and PCL has been improved and the particle size reduction of blends can be obviously observed in scanning electron microscope (SEM) images. Dynamic mechanical analysis (DMA) analysis revealed that PHBV and PCL showed improved compatibility with each other by the addition of EHBP. Differential scanning calorimetry (DSC) revealed that the decrease of crystallinity of the blend was consistent with the increase in mechanical properties. Additionally, all the bio‐blends show good thermal stability. Food overall migration studies showed that the amount of migration of composite materials in contact with food was also far lower than the national standard value. Therefore, PHBV/PCL/EHBP blends are expected to be used in the field of food packaging.

Reinforcing and Toughening Modification of poly (3-hydroxybutyrate-co-3-hydroxyvalerate)/ethylene-vinyl Acetate Copolymer (PHBV/EVA) Blends Compatibilized by Benzoyl Peroxide

Structure-property Relationships of Reactively Compatibilized PHB/EVA/starch Blends.

Poly(L-Lactide) Materials with Balanced Mechanical Properties Prepared by Blending with Peg-Mb-Ppa Multiblock Copolymers

Poly (l-lactide)/PEG-mb-PBAT blends with highly improved toughness and balanced performance

Tailoring compatibility and toughness of microbial poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/bio-based polyester elastomer blends by epoxy-terminated hyperbranched polyester

Enhanced compatibility and toughness of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)/polycaprolactone blends by ring‐opening polymerization and hydrogen bonding of epoxy‐terminated hyperbranched polyester

Reinforcing and Toughening Modification of PPC/PBS Blends Compatibilized with Epoxy Terminated Hyperbranched Polymers

Ternary Blends from Biological Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate), Poly(propylene carbonate) and Poly(vinyl acetate) with Balanced Properties

Toughened Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/Epoxidized Natural Rubber Blends Fabricated by Dynamic Vulcanization and Interfacial Compatibilization

Toughening of PBT by POE/POE-g-GMA Elastomer Through Regulating Interfacial Adhesion and Toughening Mechanism

Performance evaluation of biodegradable polymer PHBV and PBAT blends with adjustable melt flow behaviour, heat deflection temperature, and morphological transition

Toughening of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) by phenyl terminated hyperbranched polyesters with higher thermal stability

Mechanical Properties of Poly(3-hydrobutyrate-co-hydroxyvalerate)/ Biodegradable Hyperbranched Poly(ester Amide) Blends

Improving the compatibility and toughness of sustainable polylactide/poly(butylene adipate-co-terephthalate) blends by incorporation of peroxide and diacrylate

Use of crosslinking agent to produce high‐performance PLA/EVA blends via reactive processing

Polymer Blends of Pbt and Pp Compatibilized by Epoxidized Ethylene Propylene Diene Rubber

Property Study on PHBV/PBS Blends

Blending modification of PBS/PLA and its enzymatic degradation

In Service Performance of Toughened PHBV/TPU Blends Obtained by Reactive Extrusion for Injected Parts

Performance Enhancement of Biopolyester Blends by Reactive Compatibilization with Maleic Anhydride-Grafted Poly(butylene succinate-co-adipate)