Abstract:The new generation of large-thrust rockets commonly employ cryogenic liquids such as liquid hydrogen (LH2), liquid oxygen (LOX), and methane as propellants. Conventional analytical methods established under subcritical (specifically, low-pressure) conditions are inadequate for addressing the atomization issues under trans -critical and supercritical conditions. Therefore, conducting experimental research on atomization of cryogenic fluids under supercritical conditions holds significant practical value. This paper employs liquid nitrogen (LN2) as the working fluid and focuses on conducting injection atomization experiments on LN2 under supercritical pressure conditions. The research involves the design and construction of an experimental system for supercritical cryogenic fluid injection, with the aim of measuring and studying the spray characteristics of centrifugal nozzles under various conditions. Three major categories of experiments were designed for low-temperature LN2 injection: subcritical nitrogen into subcritical environment (BB), subcritical nitrogen into supercritical environment (BP), and supercritical nitrogen into supercritical environment (PP). The experimental results ultimately reveal that for jets in BB, both the spray cone angle and the breakup length increase with higher injection pressure drop. In the case of BP, the spray cone angle decreases while the penetration distance increases with higher pressure drop. As for the jets in PP, the spray cone angle increases and the penetration distance decreases with higher injection pressure drop. Across different geometric parameters of the centrifugal nozzle, it was observed that with an increase in the geometric parameter, the rate of decrease in the spray cone angle with respect to pressure drop amplifies, and the penetration distance exhibits an increasing trend as the geometric parameter grows.

Review of Internal Cavitating Flow in Injection Nozzles, External Atomization and Cooling in Liquid Nitrogen Spray Cooling Systems

Cooling Performance of Multi-Nozzle Spray with Liquid Nitrogen

Internal and External Flow Characteristics of Multi-Nozzle Spray with Liquid Nitrogen

Numerical Study of the Effects of Injection Fluctuations on Liquid Nitrogen Spray Cooling

Unsteady Cavitation of Liquid Nitrogen Flow in Spray Nozzles under Fluctuating Conditions

Numerical Analysis of Spray Characteristics with Liquid Nitrogen

Experimental Study of Liquid Nitrogen Spray Characteristics in Atmospheric Environment

Numerical Study of Liquid Nitrogen Cavitating Flow Through Nozzles of Various Shapes

Effects of Injection Pressure Difference on Droplet Size Distribution and Spray Cone Angle in Spray Cooling of Liquid Nitrogen

Review of Spray Cooling – Part 1: Single-phase and Nucleate Boiling Regimes, and Critical Heat Flux

Numerical investigation on the impact of injection rates on cooling performance in a rotor-stator cavity with liquid nitrogen spraying

Effect of flash boiling on the spray characteristics of pressure swirl spray nozzles using liquid nitrogen

Effects of Operational Parameters on Liquid Nitrogen Spray Cooling

Influence of Nozzle Type on Spray Characteristics and Surface Heat Transfer in Cryogen Spray Cooling

Flow Characteristics of Liquid Nitrogen Through Solid-Cone Pressure Swirl Nozzles

Impact of geometrical surface modification on spray cooling heat transfer performance with liquid nitrogen: An experimental investigation

Experimental study of Cryogenic jet injection using centrifugal nozzles at supercritical pressure

Experimental Investigation on Heat Transfer Characteristics of Liquid Nitrogen Spray Cooling for Large Area

Experimental Study of Low-Temperature Jet Injection Using Centrifugal Nozzles at Supercritical Pressure

The influence of cavitation on the flow characteristics of liquid nitrogen through spray nozzles: A CFD study

Review of Spray Cooling Technique and Prospect of Spray Cooling Using Nanofluids