Abstract:Plastic microchips possess the advantages of easy fabrication and low-cost, but their surface proper-ties are frequently incompatible with electrophoretic separation without proper surface modification. Meanwhile, the separation microchannels on typical microchips are usually only a few centimeters long, the pressurized flow may significantly affect the electrophoretic separation if their inner diam-eters (id) are relatively larger (approximately > 50 mu m), viscous separation medium is therefore re-quired for efficient separation. Herein, a zwitterionic surfactant, N-hexadecyl-N,N-dimethyl-3-ammonio-1-propane sulfonate (HDAPS), was used as a multifunctional additive to inhibit the analyte adsorption, improve the surface status, control Joule heating and modulate the resolution on cyclic olefin copoly-mer microchips with 80 mu m id, 5 cm long separation microchannels, eliminating the necessity of vis-cous polymeric additives. The effectiveness of HDAPS was compared with an ionic polymeric additive, poly(diallydimethylammonium chloride). The streaming potential and electroosmotic flow measurements indicated an effective inhibition of the adsorption of rhodamine B and a stable negative surface charge with zwitterionic HDAPS. Using 15 mmol/L HDAPS, 40% (v/v) methanol, and 10 mmol/L boric acid (pH 3.2) as the running buffer, rapid separation of four rhodamines was achieved within 90 s under a sepa-ration electric field of 520 V/cm. The theoretical plate numbers were in a range of 5.0x105-6.9x105/m. The relative standard deviations were no more than 0.9% for retention time and 1.5% for peak area. The proposed system was verified by the determination of rhodamines in eyeshadow and wolfberry, with standard recoveries in a range of 98.2%-101.4%.(c) 2022 Elsevier B.V. All rights reserved.

Zwitterionic Surfactant As an Additive for Efficient Electrophoretic Separation of Easily Absorbed Rhodamine Dyes on Plastic Microchips

Ionic polymer enhanced electrophoresis in plastic microchips for rapid and robust determination of rhodamine dyes

Surface modification of poly(dimethylsiloxane) microchips using a double-chained cationic surfactant for efficiently resolving fluorescent dye adsorption.

An Integrated Plastic Microchip for Enhancing Electrophoretic Separation Using Tunable Pressure-Driven Backflows.

Modification of Amorphous Poly(ethylene Terephthalate) Surface by UV Light and Plasma for Fabrication of an Electrophoresis Chip with an Integrated Gold Microelectrode

Elimination of suction effect in interfacing microchip electrophoresis with inductively coupled plasma mass spectrometry using porous monolithic plugs.

Foam-Based Electrophoretic Separation of Charged Dyes

Nonionic Surfactant Dynamic Coating of Poly(dimethylsiloxane) Channel Surface for Microchip Electrophoresis of Amino Acids

An Improved Surface Modification of Poly(dimethylsiloxane) Via a Green Chemistry Approach for On-Chip Biomolecular Separation

Hydrophilic Biopolymer Grafted on Poly(dimethylsiloxane) Surface for Microchip Electrophoresis.

In-Situ Grafting Hydrophilic Polymer on Chitosan Modified Poly (dimethylsiloxane) Microchip for Separation of Biomolecules

Influence of Soluble Polymer Polyvinylpyrrolidone on Separation of Small Peptides and Amino Acids by Microchip-Based Capillary Electrophoresis.

Improving separation performance of microchip electrochromatography using pluronic f-127

Enhanced Electrophoretic Resolution of Monosulfate Glycosaminoglycan Disaccharide Isomers on Poly(methyl Methacrylate) Chips

Zwitterionic copolymer modified polyethersulphone/sulfonated polysulphone membranes for enhancing dye/salt selective separation

A Study on the System of Nonaqueous Microchip Electrophoresis with On-Line Peroxyoxalate Chemiluminescence Detection.

Effect of surface microstructures on the separation efficiency of neurotransmitters on a direct-printed capillary electrophoresis microchip.

Microchip electrophoretic protein separation using electroosmotic flow induced by dynamic sodium dodecyl sulfate‐coating of uncoated plastic chips

Multilayer Hydroxyethyl Cellulose-Adsorbed Coating on Poly(Dimethylsiloxane) Microchips for Protein Separation

Surface modification of PDMS microfluidic devices by controlled sulfuric acid treatment and the application in chip electrophoresis

Computational design and fabrication of core-shell magnetic molecularly imprinted polymer for dispersive micro-solid-phase extraction coupled with high-performance liquid chromatography for the determination of rhodamine 6G.