Abstract:Irreversible phase transition and surface residual lithium, which cause the fast capacity fading of LiNi0.8Co0.1Mn0.1O2 (NCM811), are the main obstacles that hinder their commercial application. Herein, to modify the surface/interphase properties of NCM811, we elaborately propose a hybrid Li3PO4-AlPO4-Al(PO3)(3) coating layer that combines the advantages of ionic conductor (Li3PO4) and thermal stable compound (AlPO4) via reacting aluminum metaphosphate (Al (PO3)(3)) precursor with the surface residual lithium (Li2CO3 or/and LiOH) during the coating process. When used as cathode for lithium-ion battery, the optimized NCM811 delivers a high initial discharge capacity of 201.8 mAh g(-1) and 218.9 mAh g(-1) at 0.1C under the temperature of 30 degrees C and 50 degrees C, with capacity retention of 85.4% and 78.89% after 50 cycles, respectively, which are much higher than that of uncoated sample (73.93% and 57.98%). Moreover, when it is coupled with graphite anode to form a lithium-ion full cell, it delivers an impressively high energy density of 467.5 Wh kg(-1) (based on mass of positive and negative material), and retains 71.8% of its initial energy density after 100 cycles. The significantly enhanced electrochemical properties should be attributed to the multifunctional hybrid nano-coating layer that could efficiently reduce the surface residual lithium, suppress the irreversible phase transition, and prevent the active materials from the erosion of HF as verified by the ex-situ X-ray diffractometry, Raman spectroscopy and transmission electron microscopy. This work provides new insights into the surface/interphase design strategies to improve the structural stability of Ni-rich cathode, which will promote the development of high capacity cathode materials.

Utilizing Dual Functions of LaPO4 to Enhance the Electrochemical Performance of LiNi0.87Co0.09Al0.04O2 Cathode Material

Enhanced Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode Material via Li2TiO3 Nanoparticles Coating

Optimizing Surface Residual Alkali and Enhancing Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode by LiH2PO4

Optimizing surface residual alkali and enhancing electrochemical performance of LiNi 0.8 Co 0.15 Al 0.05 O 2 cathode by LiH 2 PO 4

Investigation of Li 3 PO 4 Coating and Nb 5+ Doping Effect on the Crystal Structure and Electrochemical Properties of Ni-Rich LiNi 0.85 Co 0.05 Mn 0.10 O 2 Cathode

Boosting the performance of LiNi0.90Co0.06Mn0.04O2 electrode by uniform Li3PO4 coating via atomic layer deposition

Improving electrochemical performance of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode for Li-ion batteries by dual-conductive coating layer of PPy and LiAlO2

Improved high-voltage performance of LiNi0.87Co0.1Al0.03O2 by Li+-conductor coating

Enhanced cycling performance of Li ion batteries based on Ni-rich cathode materials with LaPO4/Li3PO4 co-modification

Effect on Electrochemical Property of LiNi<sub>1/3</sub>Co<sub>1/3</sub>Mn<sub>1/3</sub>O<sub>2</sub> By AlPO<sub>4</sub> Nano-Coating

Effect on Electrochemical Property of LiNi1/3Co1/3Mn1/3O2 by AlPO4 Nano-Coating

The cycle performance of high nickel cathode materials significantly enhanced by the LiAlO2@Al2O3 dual-modified coating

Integrated co-modification of PO43− polyanion doping and Li2TiO3 coating for Ni-rich layered LiNi0.6Co0.2Mn0.2O2 cathode material of Lithium-Ion batteries

Enhanced electrochemical performance of Ni-rich cathode material by N-doped LiAlO2 surface modification for lithium-ion batteries

Investigation on Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Coated by Heterogeneous Layer of TiO2

Conversion of residual lithium into fast ionic conductor coating to achieve one-step double modification strategy in LiNi0.8Co0.15Al0.05O2

In-situ Formation of Hybrid Li3PO4-AlPO4-Al(PO3)3 Coating Layer on LiNi0.8Co0.1Mn0.1O2 Cathode with Enhanced Electrochemical Properties for Lithium-Ion Battery

Surface Stabilized Ni-rich LiNi0.9Co0.08Al0.02O2 Cathode Materials Via Surface Modification with GdPO4 for Lithium-Ion Batteries

Fast lithium-ion conductor LiTi2(PO4)3 coating modified LiNi0.8Co0.15Al0.05O2 as cathode material for lithium-ion batteries

Improving the Electrochemical Performance of Ni-rich Cathode Material LiNi 0.815 Co 0.15 Al 0.035 O 2 by Removing the Lithium Residues and Forming Li 3 PO 4 Coating Layer

Face-lifting the Surface of LiNi0.8Co0.15Al0.05O2cathode Via Y(PO3)3to Form Anin Situtriple Composite Li-ion Conductor Coating Layer with the Enhanced Electrochemical Performance.