HUBER'S THEOREM FOR MANIFOLDS WITH Ln/2 INTEGRABLE RICCI CURVATURES

B. O. Chen,Yuxiang LI

DOI: https://doi.org/10.1090/tran/3703

IF: 1.3529

2022-01-01

Transactions of the American Mathematical Society

Abstract:In this paper, we generalize Huber's finite points conformal compactification theorem to higher dimensional manifolds, which are conformally compact with L-n/2 integrable Ricci curvatures.

What problem does this paper attempt to address?

HUBER'S THEOREM FOR MANIFOLDS WITH L n/2 INTEGRABLE RICCI CURVATURES

Bo Chen,Yuxiang Li

DOI: https://doi.org/10.1090/tran/8703

IF: 1.3529

2022-01-01

Transactions of the American Mathematical Society

Abstract:In this paper, we generalize Huber's finite points conformal compactification theorem to higher dimensional manifolds, which are conformally compact with Ln2 integrable Ricci curvatures.
Huber's theorem for manifolds with $L^\frac{n}{2}$ integrable Ricci curvatures

Bo Chen,Yuxiang Li

DOI: https://doi.org/10.48550/arXiv.2111.07120

2022-06-08

Abstract:In this paper, we generalize Huber's finite point conformal compactification theorem to a higher dimensional manifold, which is conformally compact with $L^\frac{n}{2}$ integrable Ricci curvatures.

Differential Geometry,Analysis of PDEs
Some Dirichlet Problems Arising from Conformal Geometry

Qi-Rui Li,Weimin Sheng

DOI: https://doi.org/10.2140/pjm.2011.251.337

2011-01-01

Pacific Journal of Mathematics

Abstract:We study the problem of finding complete conformal metrics determined by some symmetric function of the modified Schouten tensor on compact manifolds with boundary; which reduces to a Dirichlet problem. We prove the existence of the solution under some suitable conditions. In particular, we prove that every smooth compact n-dimensional manifold with boundary, with n >= 3, admits a complete Riemannian metric g whose Ricci curvature Ric(g) and scalar curvature R-g satisfydet(Ric(g) - R(g)g) = const.This result generalizes Aviles and McOwen's in the scalar curvature case.
Prescribing Curvature Problems on the Bakry-Emery Ricci Tensor of a Compact Manifold with Boundary

Weimin Sheng,Lixia Yuan

DOI: https://doi.org/10.1007/s11401-013-0809-5

2014-01-01

Abstract:The authors consider the problem of conformally deforming a metric such that the k-curvature defined by an elementary symmetric function of the eigenvalues of the Bakry-Emery Ricci tensor on a compact manifold with boundary to a prescribed function. A consequence of our main result is that there exists a complete metric such that the Monge-Ampère type equation with respect to its Bakry-Emery Ricci tensor is solvable, provided that the initial Bakry-Emery Ricci tensor belongs to a negative convex cone.
Generalized Ejiri’s Rigidity Theorem for Submanifolds in Pinched Manifolds

Hongwei Xu,Li Lei,Juanru Gu

DOI: https://doi.org/10.1007/s11401-020-0199-4

2020-01-01

Abstract:Let Mn(n ≥ 4) be an oriented compact submanifold with parallel mean curvature in an (n + p)-dimensional complete simply connected Riemannian manifold Nn+p. Then there exists a constant δ(n, p) 2 (0, 1) such that if the sectional curvature of N satisfies $${\overline K _N} \in \;\,\left[ {\delta \left( {n,p} \right),\;1} \right]$$, and if M has a lower bound for Ricci curvature and an upper bound for scalar curvature, then N is isometric to Sn+p. Moreover, M is either a totally umbilic sphere $${S^n}({1 \over {\sqrt {1 + {H^2}} }})$$, a Clifford hypersurface $${S^m}({1 \over {\sqrt {2(1 + {H^2})} }})\; \times \;{S^m}({1 \over {\sqrt {2(1 + {H^2})} }})$$ in the totally umbilic sphere $${S^{n+1}}({1 \over {\sqrt {1 + {H^2}} }})$$ with n = 2m, or $${\mathbb{C}{\rm{P}}^2}\left( {{4 \over 3}\left( {1 + {H^2}} \right)} \right)$$ in $${S^7}({1 \over {\sqrt {1 + {H^2}} }})$$. This is a generalization of Ejiri’s rigidity theorem.
On Yau Rigidity Theorem for Submanifolds in Pinched Manifolds

Hong-Wei Xu,Li Lei,Juan-Ru Gu

DOI: https://doi.org/10.4310/pamq.2016.v12.n2.a6

2016-01-01

Pure and Applied Mathematics Quarterly

Abstract:In this paper, we investigate Yau's rigidity problem for compact submanifolds with parallel mean curvature in pinched Riemannian manifolds. Firstly, we prove that if M-n is an oriented closed minimal submanifold in an (n + p)-dimensional complete simply connected Riemannian manifold Nn(+p), then there exists a constant delta(0)(n, p) is an element of (0, 1) such that if the sectional curvature of N satisfies (K) over bar (N) is an element of[delta(0)(n, p), 1], and if M has a lower bound for the sectional curvature and an upper bound for the normalized scalar curvature, then N is isometric to Sn+p. Moreover, M is either a totally geodesic sphere, one of the Clifford minimal hypersurfaces S-k(root k/n) x S-n (k)(root n-k/n) in Sn+1 for k = 1,..., n-1, or the Veronese submanifold in Sn+d, where d = 1/2n(n + 1) - 1. We then generalize the above theorem to the case where M ia a compact submanifold with parallel mean curvature in a pinched Riemannian manifold.
Manifolds for which Huber's Theorem holds

Yuxiang Li,Zihao Wang

2024-04-05

Abstract:Extensions of Huber's Theorem to higher dimensions with $L^\frac{n}{2}$ bounded scalar curvature have been extensively studied over the years. In this paper, we delve into the properties of conformal metrics on a punctured ball with $\|R\|_{L^\frac{n}{2}}<+\infty$, aiming to identify necessary geometric constraints for Huber's theorem to be applicable. Unexpectedly, such metrics are more rigid than we initially anticipated. For instance, we found that the volume density at infinity is precisely one, and the blow-down of the metric is $\mathbb{R}^n$. Specifically, in four dimensions, we derive the $L^2$-integrability of the Ricci curvature, which directly leads to the conclusion that the Pfaffian 4-form is integrable and adheres to a Gauss-Bonnet-Chern formula. Additionally, we demonstrate that a Gauss-Bonnet-Chern formula, previously verified by Lu and Wang under the assumption that the second fundamental form belongs to $L^4$, remains valid for $R \in L^2$. Consequently, on an orientable 4-dimensional manifold conformal to a domain in a closed manifold, Huber's Theorem holds when $R \in L^2$, if and only if the negative part of the Pfaffian 4-form is integrable.

Differential Geometry
Submanifolds with Parallel Gaussian Mean Curvature Vector in Euclidean Spaces

Huijuan Wang,Hongwei Xu,Entao Zhao

DOI: https://doi.org/10.1007/s00229-019-01104-1

2019-01-01

manuscripta mathematica

Abstract:In the present paper, we prove a rigidity theorem for complete submanifolds with parallel Gaussian mean curvature vector in the Euclidean space $${\mathbb {R}}^{n+p}$$ under an integral curvature pinching condition, which is a unified generalization of some rigidity results for self-shrinkers and the $$\lambda $$-hypersurfaces in Euclidean spaces.
Geometry of Hermitian Manifolds

Ke-Feng Liu,Xiao-Kui Yang

DOI: https://doi.org/10.1142/s0129167x12500553

2011-01-01

International Journal of Mathematics

Abstract:On Hermitian manifolds, the second Ricci curvature tensors of various metric connections are closely related to the geometry of Hermitian manifolds. By refining the Bochner formulas for any Hermitian complex vector bundle (and Riemannian real vector bundle) with an arbitrary metric connection over a compact Hermitian manifold, we can derive various vanishing theorems for Hermitian manifolds and complex vector bundles by the second Ricci curvature tensors. We will also introduce a natural geometric flow on Hermitian manifolds by using the second Ricci curvature tensor.
Global Rigidity Theorems for Submanifolds with Parallel Mean Curvature

Yan Leng,Hong-Wei Xu

DOI: https://doi.org/10.1007/s00229-017-0932-9

2022-01-01

Acta Mathematica Scientia

Abstract:Let M be an n-dimensional oriented compact submanifold with parallel mean curvature in the unit sphere $S^{n+p}$. Denote by H and S the mean curvature and the squared length of the second fundamental form of M, respectively. We obtain a classification theorem of M if it satisfies $S+\lambda _2\le \alpha (n,H)$, where $\lambda _{2}$ is the second largest eigenvalue of the fundamental matrix and $\alpha (n,H)$ is defined as in Theorem B.
Complete Riemannian manifolds with pointwise pinched curvature

Bing-Long Chen,Xi-Ping Zhu

DOI: https://doi.org/10.1007/s002220000061

IF: 3.128

2000-01-01

Inventiones mathematicae

Abstract:. An analogous Bonnet-Myers theorem is obtained for a complete and positively curved n -dimensional ( n ≥3) Riemannian manifold M n . We prove that if n ≥4 and the curvature operator of M n is pointwise pinched, or if n =3 and the Ricci curvature of M 3 is pointwise pinched, then M n is compact.
Rigidity of Minimal Submanifolds in Space Forms

Hang Chen,Guofang Wei

DOI: https://doi.org/10.1007/s12220-020-00462-7

2020-01-01

Abstract:In this paper, we consider the rigidity for an n(≥ 4) -dimensional submanifold M^n with parallel mean curvature in the space form 𝕄^n+p_c when the integral Ricci curvature of M has some bound. We prove that, if c+H^2>0 and ‖Ric_-^λ‖ _n/2< ϵ (n,c, λ , H) for λ satisfying n-2n-1 (c+H^2) < λ≤ c+H^2 , then M is the totally umbilical sphere 𝕊^n( 1√(c+H^2)) . Here H is the norm of the parallel mean curvature of M , and ϵ (n,c,λ , H) is a positive constant depending only on n, c,λ and H . This extends part of the earlier work of Xu and Gu (Geom Funct Anal 23(5):1684–1703, 2013) from pointwise Ricci curvature lower bound to integral Ricci curvature lower bound.
Chiti-type Reverse Hölder Inequality and Torsional Rigidity under Integral Ricci Curvature Condition

Chen, Hang

DOI: https://doi.org/10.1007/s11118-020-09887-9

2021-01-01

Potential Analysis

Abstract:In this paper, we prove a reverse Hölder inequality for the eigenfunction of the Dirichlet problem on domains of a compact Riemannian manifold with the integral Ricci curvature condition. We also prove an isoperimetric inequality for the torsional rigidity of such domains. These results extend some recent work of Gamara et al. (Open Math. 13(1), 557–570, 2015) and Colladay et al. (J. Geom. Anal. 28(4), 3906–3927, 2018) from the pointwise lower Ricci curvature bound to the integral Ricci curvature condition. We also extend the results from Laplacian to p-Laplacian.
L^2 Curvature Pinching Theorems and Vanishing Theorems on Complete Riemannian Manifolds

Yuxin Dong,Hezi Lin,Shihshu Walter Wei

DOI: https://doi.org/10.2748/tmj/1576724795

2019-01-01

Tohoku Mathematical Journal

Abstract:In this paper, by using monotonicity formulas for vector bundle-valued p-forms satisfying the conservation law, we first obtain general L^2 global rigidity theorems for locally conformally flat (LCF) manifolds with constant scalar curvature, under curvature pinching conditions. Secondly, we prove vanishing results for L^2 and some non-L^2 harmonic p-forms on LCF manifolds, by assuming that the underlying manifolds satisfy pointwise or integral curvature conditions. Moreover, by a Theorem of Li-Tam for harmonic functions, we show that the underlying manifold must have only one end. Finally, we obtain Liouville theorems for p-harmonic functions on LCF manifolds under pointwise Ricci curvature conditions.
Some Pinching Theorems for Minimal Submanifolds in S~m(1)×R

Hang Chen

2013-01-01

Abstract:Let Mn be an n-dimensional compact minimal submanifolds in Sm(1)×R.We prove two pinching theorems by the Ricci curvature and the sectional curvature pinching conditions respectively.In fact,we characterize the Clifford tori and Veronese submanifolds by our pinching conditions respectively.
The Sphere Theorems for Manifolds with Positive Scalar Curvature

Juan-Ru Gu,Hong-Wei Xu

DOI: https://doi.org/10.4310/jdg/1354110198

2012-01-01

Journal of Differential Geometry

Abstract:Some new differentiable sphere theorems are obtained via the Ricci flow and stable currents. We prove that if $M^n$ is a compact manifold whose normalized scalar curvature and sectional curvature satisfy the pointwise pinching condition $R_0>\sigma_{n}K_{\max}$, where $\sigma_n\in (\frac{1}{4},1)$ is an explicit positive constant, then $M$ is diffeomorphic to a spherical space form. This gives a partial answer to Yau's conjecture on pinching theorem. Moreover, we prove that if $M^n(n\geq3)$ is a compact manifold whose $(n-2)$-th Ricci curvature and normalized scalar curvature satisfy the pointwise condition $Ric^{(n-2)}_{\min}>\tau_n(n-2)R_0,$ where $\tau_n\in (\frac{1}{4},1)$ is an explicit positive constant, then $M$ is diffeomorphic to a spherical space form. We then extend the sphere theorems above to submanifolds in a Riemannian manifold. Finally we give a classification of submanifolds with weakly pinched curvatures, which improves the differentiable pinching theorems due to Andrews, Baker and the authors.
On locally conformally flat manifolds with positive pinched Ricci curvature

Liang Cheng

2023-05-29

Abstract:By using the Yamabe flow, we prove that if $(M^n,g)$, $n\geq3$, is an $n$-dimensional locally conformally flat complete Riemannian manifold $Rc\geq \epsilon Rg>0$, where $\epsilon>0$ is a uniformly constant, then $M^n$ must be compact. Our result shows that Hamilton's pinching conjecture also holds for higher dimensional case if we assume additionally the metric is locally conformally flat.

Differential Geometry
LpRicci Curvature Pinching Theorems for Conformally Flat Riemannian Manifolds

Hong-Wei Xu,En-Tao Zhao

DOI: https://doi.org/10.2140/pjm.2010.245.381

2010-01-01

Pacific Journal of Mathematics

Abstract:Let M be an n-dimensional complete locally conformally flat Riemannian manifold with constant scalar curvature R and n >= 3. We first prove that if R = 0 and the L-n/2 norm of the Ricci curvature tensor of M is pinched in [0, C-1(n)), then M is isometric to a complete flat Riemannian manifold, which improves Pigola, Rigoli, and Setti's pinching theorem. Next, we prove that if n >= 6, R not equal 0, and the L-n/2 norm of the trace-free Ricci curvature tensor of M is pinched in [0; C-2(n)), then M is isometric to a space form. Finally, we prove an L-n trace-free Ricci curvature pinching theorem for complete locally conformally flat Riemannian manifolds with constant nonzero scalar curvature. Here C-1(n) and C-2(n) are explicit positive constants depending only on n.
Rigidity Theorems for Compact Manifolds with Boundary and Positive Ricci Curvature

Fengbo Hang,Xiaodong Wang

DOI: https://doi.org/10.48550/arXiv.0911.0380

2009-11-02

Differential Geometry

Abstract:We prove some boundary rigidity results for the hemisphere under a lower bound for Ricci curvature. The main result can be viewed as the Ricci version of a conjecture of Min-Oo.

HUBER'S THEOREM FOR MANIFOLDS WITH <i>L</i><SUP><i>n</i>/2</SUP> INTEGRABLE RICCI CURVATURES

HUBER'S THEOREM FOR MANIFOLDS WITH L <SUP>n/2</SUP> INTEGRABLE RICCI CURVATURES

Huber's theorem for manifolds with $L^\frac{n}{2}$ integrable Ricci curvatures

Some Dirichlet Problems Arising from Conformal Geometry

Prescribing Curvature Problems on the Bakry-Emery Ricci Tensor of a Compact Manifold with Boundary

Generalized Ejiri’s Rigidity Theorem for Submanifolds in Pinched Manifolds

On Yau Rigidity Theorem for Submanifolds in Pinched Manifolds

Manifolds for which Huber's Theorem holds

Submanifolds with Parallel Gaussian Mean Curvature Vector in Euclidean Spaces

Geometry of Hermitian Manifolds

Global Rigidity Theorems for Submanifolds with Parallel Mean Curvature

Complete Riemannian manifolds with pointwise pinched curvature

Rigidity of Minimal Submanifolds in Space Forms

Chiti-type Reverse Hölder Inequality and Torsional Rigidity under Integral Ricci Curvature Condition

L^2 Curvature Pinching Theorems and Vanishing Theorems on Complete Riemannian Manifolds

Some Pinching Theorems for Minimal Submanifolds in S~m(1)×R

The Sphere Theorems for Manifolds with Positive Scalar Curvature

On locally conformally flat manifolds with positive pinched Ricci curvature

LpRicci Curvature Pinching Theorems for Conformally Flat Riemannian Manifolds

Rigidity Theorems for Compact Manifolds with Boundary and Positive Ricci Curvature