Numerical simulation study on pressure loss of compressed air foam in horizontal pipeline

XU Linzhi,HE Kun,CHEN Yinchang,YANG Hui,CHENG Xudong

DOI: https://doi.org/10.11731/j.issn.1673-193x.2023.03.024

2023-01-01

Abstract:In order to clarify the pressure attenuation law of compressed air foam transported in horizontal pipeline, considering the actual engineering application of compressed air foam, the influence law of foam liquid type, mixing ratio and pipe diameter on the pressure attenuation of wet foam with horizontal pipeline transportation was studied by STARCCM software, and combined with theoretical analysis, a prediction model of pressure attenuation in the horizontal transportation process of compressed air foam was established.The results showed that the pressure drop of pipeline was positively correlated with the viscosity of foam liquid.Under the conditions of mixed liquid flow rate of 270 L/min and gas flow rate of 1 750 L/min, the pressure drop of high viscosity AFFF/AR foam was 1.3 times that of low viscosity class A and AFFF foam under the same pipe diameter.For the same type of foam, the mixing ratio had little influence on the pressure drop of pipeline, and the maximum pressure drop difference between different mixing ratios of 100 m pipeline was 7.21 kPa.The pipe diameter had great influence on the pressure drop.Under the same foam condition, the pressure drop of 50 mm pipe diameter was 9.4 times that of 80 mm pipe diameter, and the pressure drop of 80 mm pipe diameter was 2.8 times that of 100 mm pipe diameter.When the pipe diameter was greater than 80 mm, the influence of different foam on the pressure drop gradually decreased.The error between the pressure drop values calculated by the prediction model of pressure attenuation and the simulation values and the previous experimental values was within 18%,which can provide certain theoretical reference for the design on the horizontal pipeline network of compressed air foam.