Abstract:In recent years, with the prohibition of CFC by international community, the cascade refrigeration cycle is showing the development of new features, in which Auto-cascade refrigeration cycle with its simple structure, reliable performance particularly has aroused widespread concern. This paper puts forward using the distillation column instead of the multi-stage segregation device, which make full use of the distillation column to provide good enough conditions for the vapour-liquid contact,creat a greater contact surface, ensure the space and time of heat and mass transfer between each component of refrigerant and lubricant, in order to achieve high efficient separation.This cycle uses environment-friendly non-azeotropic mixed (NARM) R600a\R23\R50 as refrigerant. The improved PT equation is used, according to the quality and energy conservation of the distillation column and heat exchanger to carry on thermodynamic analysis. On this basis, the selection and the calculation of the experimental apparatus and equipment carried out to self-made a auto-cascade refrigeration cycle prototype. Through the cooling test of the eight different mixture ratio, the best quality ratio is found and the minimum temperature the ratio can reach. Through repeated experiments, study that the cycle compression ratio of one component affect on the temperature inside the ultra-low temperature box, the cycle compression ratio of the different components under the same temperature inside the ultra-low temperature box affect on the system performance, and the three throttle, cold boxes cycle high and low pressure ratio and distillation column reflux liquid extraction rate affect on the system performance. The prototype broke the traditional method that access to the depth refrigeration needs multiple refrigeration compressors, only use a single-stage air-conditioning refrigeration compressor with lubrication, to achieve high and low boiling point component through the use of distillation devices, including high-performance lubricant separation, successfully reduced to below -80 degrees C, and system stability. According to the results of a series of experiments, analyzed the ratio of working fluid, cycle pressure ratio, distillation column extraction rate of liquid return, increase heat and the expenditure component's effect on the temperature in the ultra-low temperature box and the COP of system.

Adsorption Refrigeration Technology: Theory and Application

Permeability and Thermal Conductivity of Compact Adsorbent of Salts for Sorption Refrigeration

CAPABILITY ANALYSIS OF REFRIGERATION SYSTEM WITH NON-EQUILIBRIUM ADSORPTION

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

EXPERIMENTAL STUDY ON A NEW TYPE ABSORPTION REFRIGERATION SYSTEM

EXPERIMENTAL STUDY ON A NEW ABSORPTION REFRIGERATION SYSTEM USING R134a+R32/DMF

EXPERIMENTAL STUDY ON A NEW ABSORPTION REFRIGERATION SYSTEM USING R134a+R32/DMF 1

A novel absorption refrigeration cycle

Adsorption refrigeration technology

Current status and technological advancements in adsorption refrigeration systems: A review

Experimental Study on an Absorption Refrigeration System at Low Temperatures

Performance Exploration of Temperature Swing Adsorption Technology for Carbon Dioxide Capture

STUDY ON LOWEST REFRIGERATION TEMPERATURE FOR ABSORPTION REFRIGERATION CYCLE

Investigation on Thermal Conductive Consolidated Composite CaCl2 for Adsorption Refrigeration

Feasibility Analysis on Compression-Assisted Adsorption Chiller Using Chlorides for Underground Cold Transportation

A Study On A New Auto-Cascade Refrigerating Cycle

Recent updates on the adsorption capacities of adsorbent-adsorbate pairs for heat transformation applications

Thermodynamic Analysis on Direct Air Capture for Building Air Condition System: Balance Between Adsorbent and Refrigerant

Progress in Zeolite–water Adsorption Technologies for Energy-Efficient Utilization

DETERMINATION AND ANALYSIS OF THE EFFECTIVE DIFFUSIVITY OF ADSORPTION REFRIGERATION WORKING PAIR

Evaluation of Adsorption Equilibrium and Thermodynamic Performance of R-123 (2,2-Dichloro-1,1,1-trifluoroethane)−activated Carbon Working Pair