Abstract:Perovskite oxide molybdenum doped strontium ferrite, Sr2Fe1.5Mo0.5O6-delta (SFM), is a promising alternative hydrogen electrode material for solid oxide cells (SOCs) because of its robust stability, but usually suffers from insufficient electrochemical performance. In this work, the easily reducible and catalytically active nickel ion (Ni2+) has been substituted on the B-sites of perovskite oxide SFM in the oxidizing atmosphere to form Sr2Fe1.5-xNixMo0.5O6-delta (SFMNix, x = 0.1, 0.2, and 0.3), and then partially in-situ exsolved out of the parent matrix lattices as active nano-catalysts in the reducing atmosphere to fabricate Fe-Ni alloy nanoparticles decorated SFMNix (Fe-Ni@SFMNix) materials. It is demonstrated that the electrode electrochemical performance could be effectively enhanced by tuning the Ni doping content in the parent oxide. Sr2Fe1.3Ni0.2Mo0.5O6-delta (SFMNi0.2) electrode with the Ni doping content of 0.2 exhibits the excellent electrochemical performance with a relatively low electrode polarization resistance of 0.82 Omega cm(2) in a symmetrical cell at 800 degrees C in 97%H-2 -3%H2O atmosphere, which is ascribed to the maximum exsolved Fe-Ni alloy nanocatalysts from the parent oxide SFMNi0.2. In addition, the electrode reaction process with a high resolution based on the electrochemical impedance spectra has been systematically analyzed by using the distribution of relaxation times (DRT) technique. It is demonstrated by the DRT analysis results that the low-frequency electrode reaction process associated with the hydrogen adsorption, dissociation and ionization process in the frequency range of 1-10 Hz is identified as the rate-limiting step during the operation, meanwhile, this sub-step could be effectively accelerated by varying the Ni doping content with an optimal Ni doping content of 0.2. These results demonstrate that the variation of doping content in the parent perovskite oxide is an effective strategy to manipulate the electrode electrochemical performance, and exsolved Fe-Ni alloy nanoparticles decorated perovskite oxide SFMNi0.2 is a promising hydrogen electrode candidate for SOCs application. Our findings will guide the development of other ceramic oxides electrodes with effectively enhanced electrochemical performance for energy conversion and storage applications. (C) 2020 Elsevier Ltd. All rights reserved.

An Active and Stable Hydrogen Electrode of Solid Oxide Cells with Exsolved Fe–Co–Ni Nanoparticles from Sr2FeCo0.2Ni0.2Mo0.6O6-δ Double-Perovskite

High-Performance Sr0.95Fe0.8Mo0.1Ni0.1O3−δ Electrode for Reversible Symmetrical Solid Oxide Cells

In-situ Exsolution of Nanoparticles from Ni Substituted Sr2Fe1.5Mo0.5O6 Perovskite Oxides with Different Ni Doping Contents

Engineering a High-Performance W-doped Sr 0.9 Fe 0.67 Ti 0.3 Co 0.03 O 3-Δ Hydrogen Electrode for Solid Oxide Electrolysis Cells (Soecs)

Nano La0.6ca0.4fe0.8ni0.2o3-Delta Decorated Porous Doped Ceria As A Novel Cobalt-Free Electrode For "Symmetrical" Solid Oxide Fuel Cells

In Situ Growth of Nanoparticles in Layered Perovskite La0.8Sr1.2Fe0.9Co0.1O4−δ As an Active and Stable Electrode for Symmetrical Solid Oxide Fuel Cells

A Cobalt-Free Electrode Material La0.5Sr0.5Fe0.8Cu0.2O3 − Δ for Symmetrical Solid Oxide Fuel Cells

Ni Doped La0.6Sr0.4FeO3-δ Symmetrical Electrode for Solid Oxide Fuel Cells

Symmetrical Solid Oxide Fuel Cells with Impregnated SrFe0.75Mo0.25O3−δ Electrodes

Engineering a high-performance W-doped Sr0.9Fe0.67Ti0.3Co0.03O3-δ hydrogen electrode for Solid Oxide Electrolysis Cells (SOECs)

Bifunctional electrocatalysts Pr0.5Sr0.5Cr0.1Fe1-xNixO3-δ (x=0.1,0.2) for HOR and ORR of a symmetric solid oxide fuel cell

Perovskite Chromite With In-Situ Assembled Ni-Co Nano-Alloys: A Potential Bifunctional Electrode Catalyst for Solid Oxide Cells

Solid Oxide Cells with Phase-Inversion Tape-Casted Hydrogen Electrode and SrSc<sub>0.175</sub>Nb<sub>0.025</sub>Co<sub>0.8</sub>O<sub>3</sub><sub> -</sub> Oxygen Electrode for High-Performance Reversible Power Generation and Hydrogen Production

Electrochemical Performance of Symmetric Solid Oxide Cells Employing a Sc-doped SrFeO3-δ-based Electrode

High performance and stability of nanocomposite oxygen electrode for solid oxide cells

Novel, Cobalt-Free, and Highly Active Sr2Fe1.5Mo0.5−xSnxO6−δ Cathode Materials for Intermediate Temperature Solid Oxide Fuel Cells

Fabrication and Optimization of La 0.4 Sr 0.6 Co 0.2 Fe 0.7 Nb 0.1 O 3- Δ Electrode for Symmetric Solid Oxide Fuel Cell with Zirconia Based Electrolyte

Structural, Electrical, and Electrochemical Properties of Cobalt-Doped NiFe2O4 As a Potential Cathode Material for Solid Oxide Fuel Cells

Solid Oxide Cells with Phase-Inversion Tape-Casted Hydrogen Electrode and SrSc0.175Nb0.025Co0.8O3-δ Oxygen Electrode for High-Performance Reversible Power Generation and Hydrogen Production

Leveraging in-situ formation of Ni–Fe nanoparticles to promote the catalytic performance of Ruddlesden-Popper based electrode for symmetrical solid oxide fuel cells

A highly active and carbon-tolerant anode decorated with in situ grown cobalt nano-catalyst for intermediate-temperature solid oxide fuel cells