Abstract:Solid oxide electrolysis cell (SOEC) is a promising energy conversion device for the efficient conversion of CO2 into valuable chemicals by using renewable energy sources. Fe-based perovskite oxides are highly active for CO2 electrochemical reduction as fuel electrodes in SOECs. Herein, high valence cations doped La0.6Sr0.4FeO3-δ oxides (La0.6Sr0.4FeO3-δ, La0.6Sr0.4Fe0.9Sc0.1O3-δ, La0.6Sr0.4Fe0.9Ta0.1O3-δ, La0.6Sr0.4Fe0.9W0.1O3-δ) are used as fuel electrodes in SOECs for CO2 electrolysis, and the crystal structure, electrical conductivity, chemical surface exchange coefficient (K chem), chemical bulk diffusion coefficient (D chem) and electrolysis performance are investigated for CO2 electrolysis. In addition, we determine the electrochemical processes on half cells and single cells with La0.6Sr0.4FeO3-δ series fuel electrodes by distribution of relaxation times (DRT) analysis, respectively. The results show that W-doping introduces more highly oxidative oxygen species O2 2−/O− and decreases the activation energy of lattice oxygen diffusion, thus accelerating the oxygen ion diffusion kinetics. The value of D chem for La0.6Sr0.4Fe0.9W0.1O3-δ reaches to 4.671 × 10−4cm2 S−1 at 800 °C, and this value is 3.8 times than that of La0.6Sr0.4FeO3-δ (1.216 × 10−4cm2 S−1). DRT analysis indicates the different rate-limiting steps for CO2 reduction reaction (CO2RR) on half cells and single cells, which are the dissociation of carbonate intermediate process on half cells, and the exchange and diffusion of oxygen ions process on single cells. W-doping remarkably improves the oxygen ion transport property, thus enhancing the single cell performance for CO2 electrolysis. The single cell with La0.6Sr0.4Fe0.9W0.1O3-δ fuel electrode demonstrates a high current density of 1.48 A cm−2 at 800 °C and 1.5 V, with the polarization resistance (Rp) of 0.527 Ω cm2 at open circuit voltage (OCV). Meanwhile, the single cell exhibits good stability for 50 h at an applied voltage of 1.2 V. This work reveals the difference in electrochemical processes on half cells and single cells, and provides a strategy to accelerate the CO2RR kinetics of La0.6Sr0.4FeO3-δ-based materials.

Engineering a high-performance W-doped Sr0.9Fe0.67Ti0.3Co0.03O3-δ hydrogen electrode for Solid Oxide Electrolysis Cells (SOECs)

Engineering a High-Performance W-doped Sr 0.9 Fe 0.67 Ti 0.3 Co 0.03 O 3-Δ Hydrogen Electrode for Solid Oxide Electrolysis Cells (Soecs)

High-Performance Sr0.95Fe0.8Mo0.1Ni0.1O3−δ Electrode for Reversible Symmetrical Solid Oxide Cells

Rational Design of Cobalt-Iron Selenides for Highly Efficient Electrochemical Water Oxidation

Enhanced oxygen bulk diffusion of La0.6Sr0.4FeO3-δ fuel electrode by high valence transition metal doping for direct CO2 electrolysis in solid oxide electrolysis cells

Efficient water splitting through solid oxide electrolysis cells with a new hydrogen electrode derived from A-site cation-deficient La0.4Sr0.55Co0.2Fe0.6Nb0.2O3-δ perovskite

Hydrogen Production from Water in a Solid Oxide Electrolysis Cell: Effect of Ni Doping on Lanthanum Strontium Ferrite Perovskite Cathodes

Synthesis And Characterization Of A Sr0.95y0.05tio3-Delta-Based Hydrogen Electrode For Reversible Solid Oxide Cells

Effect of tungsten doping on strontium ferrite electrode for symmetrical solid oxide electrochemical cell

La0.8Sr0.2Co0.8Ni0.2O3-δ Impregnated Oxygen Electrode for H2O/CO2 Co-Electrolysis in Solid Oxide Electrolysis Cells

Investigation into structure and property of W and Ti co-doped SrFeO3 perovskite as electrode of symmetrical solid oxide fuel cell

Highly Active and Robust A-site Deficient La0.77Sr0.2Co0.2Fe0.8O3-δ Fiber Base Electrode for Intermediate Temperature Solid Oxide Cells

Electrochemical performance and distribution of relaxation times analysis of tungsten stabilized La0 center dot 5Sr0 center dot 5Fe0 center dot 9W0 center dot 1O3-d electrode for symmetric solid oxide fuel cells

Fabrication of anode supported solid oxide electrolysis cell with the co-tape casting technique and study on co-electrolysis characteristics

Cobalt-Substituted Srti0.3fe0.7o3-: A Stable High-Performance Oxygen Electrode Material For Intermediate-Temperature Solid Oxide Electrochemical Cells

Cobalt-free SrFe0.9Ti0.1O3−δ as a high-performance electrode material for oxygen reduction reaction on doped ceria electrolyte with favorable CO2 tolerance

(Bi2o3)0.705(er2o3)0.245(wo3)0.05–co3o4: A New Oxygen Electrode Material with High Oxygen Reduction and Evolution Reaction Catalytic Activity for Low-Temperature Solid Oxide Electrochemical Cells

Performance enhancement of solution impregnated nanostructured La 0.8 Sr 0.2 Co 0.8 Ni 0.2 O 3-δ oxygen electrode for intermediate temperature solid oxide electrolysis cells

High performance solid oxide electrolysis cells using Pr 0.8Sr1.2(Co,Fe)0.8Nb0.2O 4+δ-Co-Fe alloy hydrogen electrodes

A highly stable of tungsten doped Pr0.6Sr0.4Fe0.9W0.1O3-δ electrode for symmetric solid oxide fuel cells

Cobalt-free double-perovskite oxide Sr2Ti0.9FeNi0.1O6 as a promising electrode for symmetric solid oxide electrolysis cells