Abstract:Abstract Methane pyrolysis is an emerging technology to produce lower-carbon intensity hydrogen at scale, as long as the co-produced solid carbon is permanently captured. Partially replacing Portland cement with pyrolytic carbon would allow the sequestration at a scale that matches the needs of the H 2 industry. Our results suggest that compressive strength, the most critical mechanical property, of blended cement could even be improved while the cement manufacture, which contributes to ~ 9% global anthropogenic CO 2 emissions, can be decarbonized. A CO 2 abatement up to 10% of cement production could be achieved with the inclusion of selected carbon morphologies, without the need of significant capital investment and radical modification of current production processes. The use of solid carbon could have a higher CO 2 abatement potential than the incorporation of conventional industrial wastes used in concrete at the same replacement level. With this approach, the concrete industry could become an enabler for manufacturing a lower-carbon intensity hydrogen in a win–win solution. Impact Methane pyrolysis is an up-scalable technology that produces hydrogen as a lower carbon-intensity energy carrier and industrial feedstock. This technology can attract more investment for lower-carbon intensity hydrogen if co-produced solid carbon (potentially hundreds of million tons per year) has value-added applications. The solid carbon can be permanently stored in concrete, the second most used commodity worldwide. To understand the feasibility of this carbon storage strategy, up to 10 wt% of Portland cement is replaced with disk-like or fibrillar carbon in our study. The incorporation of 5% and 10% fibrillar carbons increase the compressive strength of the cement-based materials by at least 20% and 16%, respectively, while disk-like carbons have little beneficial effects on the compressive strength. Our life-cycle assessment in climate change category results suggest that the 10% cement replacement with the solid carbon can lower ~10% of greenhouse gas emissions of cement production, which is currently the second-largest industrial emitter in the world. The use of solid carbon in concrete can supplement the enormous demand for cement substitute for low-carbon concrete and lower the cost of the low-carbon hydrogen production. This massively available low-cost solid carbon would create numerous new opportunities in concrete research and the industrial applications.

Feasibility of Utilising Porous Aggregates for Carbon Sequestration in Concrete.

Sustainable Building Material from CO2 Mineralization Slag: Aggregate for Concretes and Effect of CO2 Curing

Mechanism Underlying Early Hydration Kinetics of Carbonated Recycled Concrete Fines-Ordinary Portland Cement (CRCF-OPC) Paste

Development of Carbon Capture Coating to Improve the Durability of Concrete Structures

Enhancing the Corrosion Resistance of Recycled Aggregate Concrete by Incorporating Waste Glass Powder

Enhancement Strategies for Recycled Brick Aggregate Concrete Using MICP and EICP Treatments

Utilising CO2 technologies for recycled aggregate concrete: A critical review

Roles of carbonated recycled fines and aggregates in hydration, microstructure and mechanical properties of concrete: A critical review

Sequestration of solid carbon in concrete: A large-scale enabler of lower-carbon intensity hydrogen from natural gas

Towards green carbon capture and storage using waste concrete based seawater: A microfluidic analysis

CO2 sequestration of fresh concrete slurry waste: Optimization of CO2 uptake and feasible use as a potential cement binder

Potential for carbon adsorption on concrete: surface XPS analyses

Carbon dioxide as an admixture for better performance of OPC-based concrete

Effect of zeolite and bamboo biochar as CO2 absorbant in concrete

CO2 mineralization of demolished concrete wastes into a supplementary cementitious material – a new CCU approach for the cement industry

Wet-carbonation-based Mineral Extraction and CO2 Sequestration Using Concrete Waste Fines at a Low Temperature

Performance Assessment of Carbon Dioxide Sequestration in Cement Composites with a Granulation Technique

CO2 Pretreatment to Aerated Concrete with High-Volume Industry Wastes Enables a Sustainable Precast Concrete Industry

Effect of coarse calcareous aggregates on corrosion of steel reinforcement in marine concretes

Accelerated Carbonation of Vibro-Compacted Porous Concrete for Eco-Friendly Precast Elements

Exploring the carbon capture and sequestration performance of biochar-artificial aggregate using a new method