Abstract:This paper compares common PI controller with proximate time-optimal servomechanism (PTOS), composite nonlinear feedback (CNF) control law, and a mode switching control (MSC) scheme. The structure of PI controller is simple and easy to implement. The PTOS control law devotes to fast acceleration and deceleration, while the CNF control law consists of a linear feedback part for achieving fast response and a nonlinear feedback part for suppressing the overshoot caused by the linear part, so as to improve the transient performance in set-point tracking. The MSC scheme is proposed to achieve fast and precise set-point tracking in servo systems. The control scheme incorporates a CNF control law into PTOS control. These control laws were then applied to the position-velocity control loop in a permanent magnet synchronous motor (PMSM) servo system in simulation. The simulation results verify that the PTOS control is capable of tracking the target position fast, the CNF control can achieve the target position with a small overshoot and under the MSC scheme the servo system is able to track a wide range of target positions fast and accurately.

Speed Adaptive Backstepping Control for Specified Position Tracking of Permanent Magnet Synchronous Motor Based on Load Estimation

Backstepping Control of PMSM with Fans Load

An Adaptive Speed Control Method for Permanent Magnet Synchronous Motors

Speed Tracking Control of PMSM Based on Direct Feedback Linearization

Speed Control For A Permanent Magnet Synchronous Motor With An Adaptive Self-Tuning Uncertainties Observer

A Fast Integral Sliding Mode Controller with an Extended State Observer for Position Control of Permanent Magnet Synchronous Motor Servo Systems

Speed Sensorless Nonlinear Control Of Pmsm Drives

Backstepping Position Tracking Control for Permanent Magnetic Synchronous Motor Servo System

SPEED TRACKING CONTROL OF PERMANENT MAGNET SYNCHRONOUS MOTOR WITH BACKSTEPPING

Adaptive Backstepping Speed Control for IPMSM with Uncertain Parameters

PMSM Speed Controller Design Based on Adaptive Backstepping Control

A Position Servo System of Permanent Magnet Synchronous Motor Based on Back-Stepping Adaptive Sliding Mode Control

Integrated Design for Permanent Magnet Synchronous Motor Servo Systems based on Dynamic Sliding Mode Control

Backstepping Control of Speed for Sensorless Permanent Magnet Synchronous Motor

Research on control methods of permanent magnet synchronous motor position servo system

New vector control of the permanent magnet synchronous motor

PMSM High Precision Position Servo Control Based on Feedforward Compensation

Design and Implementation of Adaptive Backstepping Speed Control for Permanent Magnet Synchronous Motor

Sensorless Control Strategy of Permanent Magnet Synchronous Motor Based on Extended Sliding Mode Observer and the Feedforward Phase Compensator

Sensorless Backstepping Control of Permanent Magnet Synchronous Motor