Abstract:Additively manufactured alloys undergo a rapid solidification process followed by thermal cycles, which promotes the microstructures to return to equilibrium. The microstructural behavior therein is especially complicated and inconceivable at times, thereby greatly restricting the tailorability of microstructures for additive manufacturing. To improve the understanding of microstructure formation in rapidly solidified TiAl alloy, Ti-47Al-2Cr-2Nb powders were aging-treated to reveal the microstructural evolution behavior on multiple scales, and the microstructural transformation mechanisms were comprehensively analyzed from the viewpoints of thermodynamics and kinetics. The results show that the rapidly solidified TiAl alloy almost retains the alpha 2 phase, which then transforms into nanolamellar structures or equiaxed gamma microstructures depending on the temperature. The completely different microstructure selections were determined by the competitive growth of lamellar structures and equiaxed gamma grains. More importantly, atypical pathways for lamellar and twinning transformations were first discovered in these microstructural transformation processes. A 6H-type long periodic stacking ordered (LPSO) phase was observed to be in the form of straight laths in the retained alpha 2 phase, and 9R-and 18R-type LPSO phases were discovered in the equiaxed gamma grains. The 6H-type LPSO phase transformed into nano gamma laths, whose formation driving force was deduced to result from the extremely high elastic energy stored in the retained alpha 2 phase. The 9R-and 18R-type LPSO phases transformed into a more stable gamma twin phase to reduce the entire energy of the system. This research may potentially enhance the understanding of the microstructure of additively manufactured TiAl alloy and consequently, the tunability of such microstructure as required. (c) 2022 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Solidification microstructure of Ti-43Al alloy by twin-roll strip casting

Microstructure characteristics of Ti–43Al alloy during twin-roll strip casting and heat treatment

Microstructure of cast γ-TiAl based alloy solidified from β phase region

Effect of TiC on Microstructures and Mechanical Behaviors of Low-Density Nb-Ti-Al Alloys Fabricated by Laser Solid Forming

Formation Mechanism of B2 Phase and Micro-Mechanical Property of Rapidly Solidified Ti-Al-Nb Alloy

Microstructure Characterization and Hot Corrosion Mechanism of As-Cast and Heat Treated High Nb Containing TiAl Alloy

The effect of the TiC-TiB 2 nanoparticles on the microstructure and mechanical properties of Al-Mn-Si strips fabricated by twin-roll casting

Effectively mitigated macro-segregation and improved tensile properties of twin-roll casting Al-Cu strips via the addition of TiC nanoparticles

Prediction on the solidification behavior of AA6005 aluminum alloys produced by inclined twin-roll casting: A finite element analysis

Synthesis and solidification characterization of TiAl based alloy with fine grain structure

The Effect of the TiC-TiB2 Nanoparticles on the Microstructure and Mechanical Properties of Al-Mn-Si Strips Fabricated by Twin-Roll Casting

Synergistic effects of the TiC nanoparticles and cold rolling on the microstructure and mechanical properties of Al–Cu strips fabricated by twin-roll casting

Microstructure of Aluminum Twin-Roll Casting Based on Cellular Automation

Simulation of microstructures in solidification of aluminum twin-roll casting based on CA

Solidification Microstructure Evolution and Mechanical Properties of Casting Ti-48Al-2Cr-2Nb-(Ni,TiB2)Alloy

Mechanism of Electromagnetic Field in the Sub-RapidSolidification of High-Strength Al-Cu-Li Alloy Produced by Twin-Roll Casting

Heat Transfer and Macrostructure Formation of Nb Containing TiAl Alloy Directionally Solidified by Square Cold Crucible

A Novel Method to Directional Solidification of TiAlNb Alloys by Mixing Binary TiAl Ingot and Nb Wire

Microstructure study of rapidly solidified TiAl-Cr-xNb-Y alloys

Microstructure, Precipitates Behavior, and Mechanical Properties of Age-Hardened Al-Mg-Si Alloy Sheet Fabricated by Twin-Roll Casting

Atypical Pathways for Lamellar and Twinning Transformations in Rapidly Solidified TiAl Alloy