Abstract:In order to improve the energy output consistency of 3, 3′-diamino-4, 4′-azoxyfurazan (DAAF) in the new insensitive booster and the safety and efficiency in the preparation process, a continuous preparation system of DAAF from synthesis to spherical coating was designed and established in this paper, which combined ultrasonic micromixing reaction with microdroplet globular template. In the rapid micromixing stage, the microfluidic mixing technology with ultrasonic was used to synergistically strengthen the uniform and rapid mass transfer mixing reaction between raw materials to ensure the uniformity of DAAF particle nucleation-growth, and to prepare high-quality DAAF crystals with uniform structure and morphology and concentrated particle size distribution. In the microdroplet globular template stage, the microfluidic droplet technology was used to form a droplet globular template with uniform size under the shear action of the continuous phase of the dispersed phase solution containing DAAF particles and binder. The size of the droplet template was controlled by adjusting the flow rate ratio between the continuous phase and the dispersed phase. In the droplet globular template, with the diffusion of the solvent in the dispersed phase droplets, the binder precipitates to coat the DAAF into a ball, forming a DAAF microsphere with high sphericity, narrow particle size distribution and good monodispersity. The problem of discontinuity and DAAF particle suspension in the process was solved, and the coating theory under this process was studied. DAAF was coated with different binder formulations of fluororubber (F2604), nitrocellulose (NC) and NC/glycidyl azide polymer (GAP), and the process verification and evaluation of the system were carried out. The balling effects of large, medium and small droplet templates under different binder formulations were studied. The scanning electron microscope (SEM) results show that the three droplet templates under the three binder formulations exhibit good balling effect and narrow particle size distribution. The DAAF microspheres were characterized by powder X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermo-gravimetric (TG) and sensitivity analyzer. The results showed that the crystal structure of DAAF did not change during the process, and the prepared DAAF microspheres had lower decomposition temperature and lower mechanical sensitivity than raw DAAF. The results of detonation parameters show that the coating of DAAF by using the above three binder formulations will not greatly reduce the energy output of DAAF, and has comparable detonation performance to raw DAAF. This study proves an efficient and safe continuous system from synthesis to spherical coating modification of explosives, which provides a new way for the continuous, safe and efficient preparation of spherical explosives.

Preparation of HNS-based PBX Composite Microspheres with Narrow Particle Size Distribution by Droplet Microfluidics

Preparation of HMX/TATB spherical composite explosive by droplet microfluidic technology

Fabrication of microspherical Hexanitrostilbene (HNS) with droplet microfluidic technology

Preparation of flame-retardant HNS/DAAF energetic composite microspheres using droplet microfluidic technology

Preparation of TATB?based PBX Composite Microspheres by Droplet Microfluidic Technology

Crystal phase control and ignition properties of HNS/CL-20 composite microspheres prepared by microfluidics combined with emulsification techniques

High-quality and Homogeneous HMX-based Aluminized Explosives Using Droplet Microfluidic Technology

PEG Based Hyperbranched Polymeric Hollow Nanospheres

Preparation of agglomeration-free composite energetic microspheres taking PMMA-PVA with honeycomb structure as template via the molecular collaborative self-assembly

Monodisperse Temperature-Responsive Hollow Polymer Microspheres: Synthesis, Characterization and Biological Application

Preparation, High-Density Spherical, and Low Sensitivity of RDX/NC/PMMA Composite Particles

Core-Shell Structured HMX@Polydopamine Energetic Microspheres: Synergistically Enhanced Mechanical, Thermal, and Safety Performances

Mechanical behavior of PBX with different HMX crystal size during die pressing: Experimental study and DEM simulation

Rapid Assembly and Preparation of Energetic Microspheres LLM‐105/CL‐20

Preparation of hollow composite spheres with raspberry-like structure based on hydrogen-bonding interaction

Process and Performance of DAAF Microspheres Prepared by Continuous Integration from Synthesis to Spherical Coating Based on Microfluidic System

Preparation of uniform hypercrosslinked microspheres with large specific surface area

A Surfactant-Assisted Approach for Preparing Colloidal Azo Polymer Spheres with Narrow Size Distribution

Tailoring Surface Defects to Enhance PBX Surface Adhesion Through Autologous Surface Molecular Reconfiguration

Preparation of nitrocellulose microspheres based on low-cost high-throughput microfluidic technology

SANS Investigation on the Effect of Cold-pressed Forming Pressure on the Microstructure of HMX-based PBX