Abstract:Microfluidic chips have been widely applied in biology and medical research for stably generating uniform droplets that can be solidified into hydrogel microspheres. However, issues such as low microsphere yield, lengthy experimental processes, and susceptibility to environmental interference need to be addressed. In this work, a simple and effective method was developed to modify microfluidic chips at room temperature to improve the production performance of hydrogel microspheres. Numerical simulation-assisted experiments were conducted to comprehensively understand the effect of solution viscosity, hydrophilicity, and flow rate ratio on droplet formation during microsphere production. Chitosan was selected as the main component and combined with poly(ethylene glycol) diacrylate to prepare photocurable hydrogel microspheres as a demonstration. As a result, grafting fluoro-silane (FOTS) increased the contact angle of the channel from 90 to approximately 110°, which led to a 12.2% increase in droplet yield. Additionally, FOTS-modification attenuated the impact of the flow rate ratio on droplet yield by 19.1%. Alternatively, depositing dopamine decreased the channel's contact angle from 90 to 60°, resulting in a 21.4% increase in particle size and enabling the chip to adjust droplet size over a wider range. Further study demonstrates that the obtained hydrogel microspheres can be modified with layers of aldehyde, which can potentially be used for controlled drug release. Overall, this study proposed a facile method for adjusting the yield and droplet size through surface treatment of microfluidic chips while also enhancing the understanding of the synergistic effects of multiple factors in microfluidics-based microsphere production.

Preparation of nitrocellulose microspheres based on low-cost high-throughput microfluidic technology

Leveraging 3D Printing for the Design of High-Performance Venturi Microbubble Generators

Fabrication of microspherical Hexanitrostilbene (HNS) with droplet microfluidic technology

Preparation of Single, Heteromorphic Microspheres, and Their Progress for Medical Applications

Facile synthesis of monodisperse aluminum nitride microspheres

Fabrication of monodisperse, large-sized, functional biopolymeric microspheres using a low-cost and facile microfluidic device

Scalable Production of Monodisperse Functional Microspheres by Multilayer Parallelization of High Aspect Ratio Microfluidic Channels

An Injection-Mold Based Method with a Nested Device for Microdroplet Generation by Centrifugation

Controllable Preparation Of Nanoparticle-Coated Chitosan Microspheres In A Co-Axial Microfluidic Device

Mass production of highly monodisperse polymeric nanoparticles by parallel flow focusing system

Facile and scalable generation of fluorescent microspheres using a microfluidic electrojetting device

Droplet Microfluidic-Based Low-Cost and High-Speed Microsphere Array Direct Writing Technology and Its Applications

Preparation of 10μm scale monodispersed particles by jetting flow in coaxial microfluidic devices

Facile precipitation microfluidic synthesis of Monodisperse and inorganic hollow microspheres for Photocatalysis

Fabrication of Microspheres from High-Viscosity Bioink Using a Novel Microfluidic-Based 3D Bioprinting Nozzle

Synthesis of nanoparticles via microfluidic devices and integrated applications

A New Method for the Preparation of Monoporous Hollow Microspheres

Preparation of Monodispersed Nanofibrous Gelatin Microspheres Using Homebuilt Microfluidics

Preparation of HNS-based PBX Composite Microspheres with Narrow Particle Size Distribution by Droplet Microfluidics

Optimizing the Production of Hydrogel Microspheres Using Microfluidic Chips: The Influence of Surface Treatment on Droplet Formation Mechanism

A 3D printed size-tunable flow-focusing droplet microdevice to produce cell-laden hydrogel microspheres