Abstract:In this work sulfided CoMo/MgAl2O4 catalysts used in fluid bed catalytic hydropyrolysis for the conversion of beech wood and wheat straw to liquid fuels were thoroughly characterized by Raman spectroscopy and scanning (transmission) electron microscopy (S(T)EM) together with energy dispersive X-ray spectroscopy (EDS). Potassium and calcium were transferred from the beech wood to the catalyst, and the accumulated amounts increased proportionally with the time on stream (TOS) and reached 0.67 and 0.28 wt % after 16.2 h, respectively, when beech wood was used as biomass feedstock with a feeding rate of approximately 270 g/h (4.4 kg in total) beech wood to 50 g of catalyst. The concentration of coke on the spent catalyst also increased with TOS and was 3.7 wt % (carbon) after 3.5 h and 7.2 wt % after 16.2 h, indicating that the coking rate decreased with time on stream. However, SEM-EDS indicated that the carbon concentration increased more on the surface than in the bulk, thereby increasing the risk of pore blocking. In addition, Raman spectroscopy showed that the initially formed coke was mostly graphitic, but the coke became less ordered as successive layers grew on top. Doping the catalyst with K2CO3, corresponding to a potassium loading of 1.9 wt %, prior to the sulfidation, led to a higher degree of stacking and increased the slab length of the MoS2 particles. Furthermore, SEM images of the spent catalyst indicated that the catalyst particles were encapsulated by a layer of coke during pyrolysis, but this layer was continuously removed by knock-off. This indicates that potassium acts as a catalyst for polymerization of tar and coking reactions on the catalyst. The effect of using wheat straw, which contains 10 times more potassium than beech wood, as feedstock was also investigated. This led to defluidization due to agglomeration within the first 0.3 h on stream. SEM images showed that agglomerates of char and catalyst particles, with a diameter up to 5 mm, were formed due to polymerization of the metaplast and tar. Additionally, SEM-EDS images showed that potassium was well-distributed in the agglomerates, indicating that potassium catalyzed the formation of these agglomerates.

Preparation of modified walnut shell char supported Molybdenum carbide catalyst and its application in hydrodeoxidation of corn oil

Dehydrative Decarbonylation of Fatty Acids into Long-Chain Olefins over CoNx/NC Catalysts

Catalytic Transfer Hydrogenation Of Oleic Acid To Octadecanol Over Magnetic Recoverable Cobalt Catalysts

Activated Carbons for the Hydrothermal Upgrading of Crude Duckweed Bio-Oil

Carbon-supported Molybdenum Carbide Catalysts for the Conversion of Vegetable Oils.

Carbon nanofibers supported molybdenum carbide catalysts for hydrodeoxygenation of vegetable oils

Carbon‐Supported Molybdenum‐Based Catalysts for the Hydrodeoxygenation of Maize Oil

Nanostructured Molybdenum Carbides Supported on Carbon Nanotubes As Efficient Catalysts for One-Step Hydrodeoxygenation and Isomerization of Vegetable Oils

Catalytic pyrolysis and in situ carbonization of walnut shells: poly-generation and enhanced electrochemical performance of carbons

Solvent assisted to prepare shell structured Cu/γ-Al 2 O 3 catalyst with low Cu content for oil efficient hydrodeoxygenation to high-quality biofuel

Microwave-assisted catalytic pyrolysis of corn cobs with Fe-modified Choerospondias axillaris seed-based biochar catalyst for phenol-rich bio-oil

Molybdenum Carbide‐Catalyzed Conversion of Renewable Oils into Diesel‐like Hydrocarbons

Efficient catalytic conversion of jatropha oil to high grade biofuel on Ni-Mo2C/MCM-41 catalysts with tuned surface properties

Deactivation of a CoMo Catalyst during Catalytic Hydropyrolysis of Biomass. Part 2. Characterization of the Spent Catalysts and Char

Highly stable Mo-based bimetallic catalysts for selective deoxygenation of oleic acid to fuel-like hydrocarbons

Catalytic HDO of pyrolysis oil in supercritical ethanol with CoMoP and CoMoW catalysts supported on different carbon materials using formic acid as in-situ hydrogen sources

Insight Understanding of Ultrathin Carbon-Deficient Molybdenum Carbide Catalytic Activity for CO2 Conversion into Hydrocarbon Fuels

Hierarchical Porous Honeycomb NiCo/C Catalyst for Decarboxylation of Fatty Acids and Upgrading of Sludge Bio-Crude

MOF-Derived Co3O4 Nanoparticles Catalyzing Hydrothermal Deoxygenation of Fatty Acids for Alkane Production

Hydrodeoxygenation of vanillin catalyzed by molybdenum carbide supported on activated carbon

Production of hydrocarbon-rich bio-oil from catalytic pyrolysis of waste cooking oil over nickel monoxide loaded corn cob-derived activated carbon