Abstract:Experimental and simulation results show that the increase in volume fraction of KFRP grows the critical penetration velocity of C/K hybrid composite laminates and that KFRP is better as an impact surface. This study investigated the high‐velocity impact behavior of composite plates with different hybrid ratios and structural configurations through experimental and numerical simulation studies. The results showed that the critical penetration velocity of the composite plate generally increases with an increase in the volume fraction of aramid fibers. The high‐velocity impact finite element model developed in this study accurately simulated the high‐velocity impact behavior of laminated fiber composite plates with various hybrid ratios and different structures. The impact failure patterns of the plates were analyzed, and it was observed that the carbon fibers on the back face were prone to tensile fracture, followed by the gradual fracture of aramid fibers. The numerical simulation results show significant differences in residual impact velocity and energy absorption when impacted from different sides and the impact from the aramid side resulted in better energy absorption, which is contrary to the findings in many existing research papers. These findings provide valuable insights into the impact resistance of composite materials and can guide the design and development of high‐performance composite structures for aero‐engine case designing. Highlights The high‐velocity impact behavior of C/K fiber epoxy resin matrix composite laminates are studied. The critical penetration velocity increases with the increase of aramid fiber volume fraction. The laminate absorbs most of the impact energy during the instantaneous impact time. Energy absorption ability is better when the impact surface is aramid fibers. Carbon fibers on the back side of the laminate are more prone to tensile fracture.

Comparative Study on the Low-Velocity Impact Properties of Unidirectional Flax and Carbon Fiber Reinforced Epoxy Plates

Impact responses and residual flexural properties of narrow CFRP laminates

Study on Low-Velocity Impact and Residual Compressive Mechanical Properties of Carbon Fiber-Epoxy Resin Composites

Simulation and Experiment on the Low-Velocity Impact Response of Flax Fabric Reinforced Composites

Research on Low-Velocity Impact Response of Novel Short-Fiber-Reinforced Composite Laminates

Low-Velocity Impact Behavior and Damage Characteristics of CFRP Laminates

Low-velocity impact and compression-after-impact behaviors of twill woven carbon fiber/glass fiber hybrid composite laminates with flame retardant epoxy resin

The behaviour of thermoplastic and thermoset carbon fibre composites subjected to low-velocity and high-velocity impact

Experimental and numerical investigations on the dynamic response of woven carbon fiber reinforced thick composite laminates under low-velocity impact

Experimental and Simulation Study on Failure of Thermoplastic Carbon Fiber Composite Laminates under Low-Velocity Impact

Mechanical Behaviors of Composite Auxetic Structures under Quasi-Static Compression and Dynamic Impact

Effect of Temperature and Water Absorption on Low-Velocity Impact Damage of Composites with Multi-Layer Structured Flax Fiber

Low-velocity impact and quasi-static post-impact compression analysis of woven structural composites for automotive: Influence of fibre types and architectural structures

Static and Impact Properties of Flax-Reinforced Polymers Prepared with Conventional Epoxy and Sustainable Resins

Low-speed impact behavior of fiber-reinforced polymer-based glass, carbon, and glass/carbon hybrid composites

Investigation of Impact Energy Absorption and Damage in Woven Carbon Fiber Reinforced Polymer Composite materials

Study of the dynamic response and damage evolution of carbon fiber/ultra-thin stainless-steel strip fiber metal laminates under low-velocity impact

In-plane compression response of woven CFRP composite after low-velocity impact: Modelling and experiment

Post-Impact Compression Behavior of Natural Flax Fiber Composites

High‐velocity impact resistance and energy absorption behavior of Carbon‐Kevlar hybrid composite laminates

Crashworthiness and Failure Analyses of FRP Composite Tubes under Low Velocity Transverse Impact