Abstract:The frost-free air-source heat pump (ASHP) with integrated liquid desiccant dehumidification is a more promising energy-saving alternative to the conventional ASHP unit. The performance of spray-type finned-tube heat exchanger (FTHE), as one of the key equipment of this frost-free ASHP system, is affected by a combination of various factors including wall wettability, liquid film flow pattern, liquid film thickness, velocity distribution in a liquid film, interface wave, interface velocity and so on. To provide a theoretical basis for the operation, design and optimization of high-performance spray-type FTHE, a visualization experiment system and a three-dimensional (3D) numerical model are employed to study the behaviors of counter-current gas-liquid falling film flow on the air-side of two-row plain FTHE under different parameters in the present paper. According to the experimental results, the flow pattern of liquid film on the finned-tube surface is a mixture flow composed of the rivulet flow and the thin falling film flow, demonstrating that the assumption of the uniform distribution for liquid film thickness proposed in previous studies is not completely consistent with the actual situation. Meanwhile, the numerical results indicate that the transient-average film thickness on the surface of two-row plain finned-tube is significantly 18.3% – 32.5% higher than that on the vertical plate calculated by Nusselt's model. After that, the critical gas and liquid Reynolds numbers of the flow pattern transition for the liquid film are obtained, and it is pointed out that the wall contact angle of 10° is more conducive to the formation of complete film flow on the air-side of the two-row plain FTHE within the fin pitch range of 4.8 – 6.0 mm. The changes of the falling liquid film and gas-liquid interface characteristics are fundamentally attributed to the drag effect of the interfacial shear force. Furthermore, there is a cubic curve relationship between average interface shear force and gas Reg. A quadratic curve relation exists between average wall shear stress and gas Reg. At the same time, the velocity of falling film fluid at the bottom region of laminar flow is reduced, resulting from the inhibiting effect of the interfacial shear force.

Air-side thermal-hydraulic analysis and parameter optimization for vertical-fin microchannel heat exchanger

Thermohydraulic Performance Optimization of Integrated Porous Pin Fins in Microchannel Heat Sink Using Shape Optimization Coupled with NSGA

Performance Evaluation of a Vertical-Finned Microchannel and a Fin-Tube Heat Exchangers under Wet and Frosting Conditions

Performance Evaluation and Analysis of a Vertical Heat Pipe Latent Thermal Energy Storage System with Fins-Copper Foam Combination

Optimization of H-type finned tube heat exchangers with combinations of longitudinal vortex generator, dimples/protrusions and grooves by Taguchi method

Simulation and Optimization Study on the Performance of Fin-and-Tube Heat Exchanger

Thermo‐hydraulic analysis of wavy microchannel heat sinks with porous fins based on field synergy principle

Heat analysis and optimal design of fin-and-tube heat exchanger with X-truss vortex generators

Numerical Study on Air-Side Performance of an Integrated Fin and Micro-Channel Heat Exchanger

Analysis and Optimization of Thermo-Hydraulic Characteristics of Phase Change Slurry in Wavy MCHS with Porous Fins Based on RSM and Desirability Methods

Thermal-hydraulic Performance of Novel Louvered Fin Using Flat Tube Cross-Flow Heat Exchanger

SIMULATION AND PARAMETRIC ANALYSIS OF MICROCHANNEL CONDENSOR

Numerical analysis on heat transfer enhancement of wavy fin-tube heat exchangers for air-conditioning applications

Thermal-hydraulic performance evaluation of airside of wavy fin compact heat exchangers under wet conditions

Experimental Investigation of the Performance of Microchannel Heat Exchangers with a New Type of Fin under Wet and Frosting Conditions

Experimental and numerical investigation on air-side performance of fin-and-tube heat exchangers with various fin patterns

Experimental and Numerical Investigation of Thermal -Hydraulic Performance in Wavy Fin-and-flat Tube Heat Exchangers

Heat transfer optimization based on finned microchannel heat sink

PIV and thermal-vision experimental and numerical investigation on the airside performance of slotted fin surfaces

Visualization experiment and numerical simulation on behaviors of gas-liquid falling film flow on the air-side of two-row plain finned-tube heat exchanger

Thermo-hydraulic performance and exergy analysis of a fin-and-tube heat exchanger with sinusoidal wavy winglet type vortex generators