Abstract:Purpose In typical model-based calibration, linearization errors are derived inevitably, and non-negligible negative impact will be induced on the identification results if the rotational kinematic errors are not small enough or the lengths of links are too long, which is common in the industrial cases. Thus, an accurate two-step kinematic calibration method minimizing the linearization errors is presented for a six-DoF serial robot to improve the calibration accuracy. Design/methodology/approach The negative impact of linearization on identification accuracy is minimized by removing the responsible linearized kinematic errors from the complete kinematic error model. Accordingly, the identification results of the dimension-reduced new model are accurate but not complete, so the complete kinematic error model, which achieves high identification accuracy of the rest of the error parameters, is combined with this new model to create a two-step calibration procedure capable of highly accurate identification of all the kinematic errors. Findings The proportions of linearization errors in measured pose errors are quantified and found to be non-negligible with the increase of rotational kinematic errors. Thus, negative impacts of linearization errors are analyzed quantitatively in different cases, providing the basis for allowed kinematic errors in the new model. Much more accurate results were obtained by using the new two-step calibration method, according to a comparison with the typical methods. Originality/value This new method achieves high accuracy with no compromise on completeness, is easy to operate and is consistent with the typical method because the second step with the new model is conveniently combined without changing the sensors or measurement instrument setup.

An Integrated Kinematic Calibration and Dynamic Identification Method with Only Static Measurements for Serial Robot

Separable Nonlinear Least Squares Algorithm for Robust Kinematic Calibration of Serial Robots.

A Two-Stage Parameter Identification Method and Compensation Verification for Heavy Load Robot

An Improved Kinematic Model for Serial Robot Calibration Based on Local POE Formula Using Position Measurement

Calibration of 6-DOF Parallel Mechanism Using Joint Force Sensors

Accurate Kinematic Calibration of a Six-Dof Serial Robot by Using Hybrid Models with Reduced Dimension and Minimized Linearization Errors

The Parameter Identification Model Considering Both Geometric Parameters and Joint Stiffness.

A Minimal POE-Based Model for Robotic Kinematic Calibration with Only Position Measurements

Dynamics Parameter Identification of Articulated Robot

An Online One-Step Method to Identify Inertial Parameters of the Base and the Target Simultaneously for Space Robots in Postcapture.

Elasto-geometrical calibration of six-DOF serial robots using multiple identification models

Kinematic Calibration Method with High Measurement Efficiency and Robust Identification for Hybrid Machine Tools

Simultaneous Identification of Joint Stiffness, Kinematic and Hand-Eye Parameters of Measurement System Integrated with Serial Robot and 3D Camera.

Kinematic-Parameter Identification for Serial-Robot Calibration Based on POE Formula

A Kinematic Calibration Method Based on the Product of Exponentials Formula for Serial Robot Using Position Measurements

A Calibration Method of Robots by Eliminating Redundant Parameters Based on Jacobian Matrix

Measurement Configuration Optimization and Kinematic Calibration of a Parallel Robot

Kinematics Redundancy Identification of Arbitrary Serial Robot

Calibration Optimization of Kinematics and Dynamics for Delta Robot Driven by Integrated Joints in Machining Task

Kinematic Calibration of Serial Robot Using Dual Quaternions.

An Approach for Identifying Dynamic Parameters in Robotic Systems With Inconsistent Joint Measurements