Abstract:Nowadays, the clean energy is of special concern researches owing to the unavoidable environmental pollutions. To satisfy the demand of sustainable development strategy, it is necessary to develop high-efficient and portable energy storage and conversion devices. Lithium ion batteries (LIBs) are considered as most promising electrochemical energy storage system in this era and are anticipated to power the mentioned applications. Herein, a facile and effective route has been developed for synthesis of CoO/reduced graphite oxide (RGO) composites as LIB anodes. In the synthesis, the GO prepared by the modified Hummers' method was dissolved into deionized water, and then mixed with Co(NO3)(2) solution. Subsequently, the obtained homogeneous solution was transferred into 100 mL Teflon-lined stainless-steel autoclave. The sealed autoclave was putted into an oven at 160 degrees C for 6 h. After cooled down to room temperature, the precursor of depositions were filtered, washed with deionized water and dried at 80 degrees C. Finally, the precursor was thermal treated at 500 degrees C for 2 h in a tube furnace under nitrogen ambient to obtain the final product of CoO/RGO composites. The synthetic composites were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). XRD patterns proved that the composites were composed of CoO and graphene. SEM images indicated the CoO nanoparticles grown on the graphene nanosheets uniformly. The CoO nanoparticles loaded on the surface of graphene nanosheets could prevent the aggregation of graphene. Meanwhile, the graphene nanosheets could combine with each other to form a large 3D electron conductive network, which can promote the electrical conductivity of the composite. The LIB was assembled in glove-box, in which the composite electrode and metal lithium plate were used as the anode and the cathode, respectively. The electrochemical test results imply that the initial discharge specific capacity could be up to 1312.6 mAh.g(-1) at a current density of 100 mA.g(-1). Notably, the discharge specific capacity is still about 557.4 mAh.g(-1) after 300 cycles at a high current density of 10000 mA.g(-1). It is demonstrated that the composite exhibits high specific capacity, excellent rate capability and well cyclic stability. The 3D network could be used as a stable framework to accommodate the volume change of active material during Li+ insertion/extraction, which play important role for the superior electrochemical performance.

Multi-hierarchical Heterostructure of GO/ NiCo2O4/Co3O4 for High Power Lithium-Ion Batteries

A Novel NiCo2O4@GO Hybrid Composite with Core-Shell Structure As High-Performance Anodes for Lithium-Ion Batteries

Hierarchical Hybrid ZnFe2O4 Nanoparticles/reduced Graphene Oxide Composite with Long-Term and High-Rate Performance for Lithium Ion Batteries

Multi‐Hierarchical Heterostructure NiCo2O4/ZnCo2O4/CC Anode for Fast and Stable Lithium Storage

Hierarchically Hollow and Porous NiO/NiCo2O4 Nanoprisms Encapsulated in Graphene Oxide for Lithium Storage

3D-Hierarchical NiO–graphene Nanosheet Composites As Anodes for Lithium Ion Batteries with Improved Reversible Capacity and Cycle Stability

Facile Hydrothermal Fabrication of an α-Ni(OH) 2 /N-Doped Reduced Graphene Oxide Nanohybrid as a High-Performance Anode Material for Lithium-Ion Batteries

Bimetallic Phosphide Ni2P/CoP@rGO Heterostructure for High-Performance Lithium/sodium-Ion Batteries

Hierarchically Hollow and Porous NiO/NiCo 2 O 4 Nanoprisms Encapsulated in Graphene Oxide for Lithium Storage

Hydrothermal for Synthesis of Coo Nanoparticles/Graphene Composite As Li-Ion Battery Anodes

Hierarchical Ultrafine Ni3V2O8 Nanoparticles Anchored on Rgo As High-Performance Anode Materials for Lithium-Ion Batteries

Excellent lithium storage performance of Ni-MOFs/GO composite as anode in lithium ion battery

Hierarchical Porous Sno2/Reduced Graphene Oxide Composites for High-Performance Lithium-Ion Battery Anodes

Three-dimensional Porous Co3O4-CoO@GO Composite Combined with N-doped Carbon for Superior Lithium Storage

Well-Designed Hierarchical Co3o4 Architecture As A Long-Life and Ultrahigh Rate Capacity Anode for Advanced Lithium-Ion Batteries

Hierarchical Linixcoyo2 Mesostructures As High-Performance Cathode Materials for Lithium Ion Batteries

In Situ Construction of Zn2Mo3O8/ZnO Hierarchical Nanosheets on Graphene as Advanced Anode Materials for Lithium-Ion Batteries

Hollow sea urchin-like microspheres of the dual transition metal oxides NiO/Co 3 O 4 immobilized on rGO enhance lithium-ion battery cycling and rate performance

Co3O4/RGO Nanoparticles Fabricated by Facile Solvothermal Method as an Anode Material for High‐Performance Lithium‐Ion Batteries

Hierarchical Co2VO4 Yolk-Shell Microspheres Confined by N-doped Carbon Layer As Anode for High-Rate Lithium-Ion Batteries

High-Capacity Anode Material for Lithium-Ion Batteries with a Core–Shell NiFe2O4/Reduced Graphene Oxide Heterostructure