Abstract:Ni-rich LiNixCoyMn1_x_yO2 cathodes attract growing attention for high energy density but still face great challenges in terms of cyclic lifespan and thermal stability issues. The structural degradation is primarily caused by the increased oxygen vacancy and lattice oxygen loss, especially at high temperatures. Here, we develop an anchoring-confining strategy to rivet lattice oxygen and inhibit the formation and migration of oxygen vacancy by constructing LiNbO3 & LiF epitaxial layer and Nb5+ lattice doping within LiNi0.92Co0.055Mn0.025O2 (NCM92) cathode. The optimized NCM-FN material exhibits excellent stability with retenion of 93 % after 200 cycles at 1C supassing the pristine one (68.7 %), conspicuous high-temperature capacity retention rate (81.6 % vs. 49.5 %) and superior reversible capacity of 165 mAh/g at 5C. In particular, it even possessed superior thermal safety pushing thermal runaway temperature to 223.65 C-degrees. In-situ X-ray diffraction (XRD) result indicates that Nb5+ lattice substitution coupled with LiNbO3 & LiF epitaxial layer alleviates the irreversibility of H-2-H-3 phase transition, thus stabilizing the layered structure. Furthermore, the LiNbO3 & LiF epitaxial layer, as both a physical shielding layer and ionic conductive layer, protects interface structural integrity and simultaneously promotes Li+ diffusion. X-ray photoelectron spectroscopy (XPS) and electron paramagnetic resonance (EPR) results demonstrate that the formation and propagation of oxygen vacancy within NCM-FN material is significantly inhibited. DFT calculation results reveal that Nb5+ introduction can increase the formation energy of oxygen vacancies and inhibit outward migration of active oxygen O alpha- (alpha < 2) to stabilize layer structure by tuning the breaking energy barrier of nearby metal-O bonds. This work not only demonstrates the design of advanced Ni-rich layered cathodes but also underscores the importance of stabilized lattice oxygen for advanced Ni-rich cathodes.

Enabling Excellent Thermal Stability of an Ultrahigh Nickel-Rich Cathode (lini0.90co0.05mn0.05o2) by a Magnesium and Titanium Codoping Strategy

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Improving the Electrochemical Performances and Structural Stability of Ultrahigh-Ni Cathodes by Using Multi-Element Co-Doping Methods

Enhancing the Structural Stability and Electrochemical Performance of High-Nickel Cathode Materials through Ti Doping with an Exothermic Non-oxide Precursor

Improving the Performance of LiNi0.925Co0.065Mn0.01O2 via Ti4+& Nb5+ Co-Modifications

Enabling high-rate discharge capability and stable cycling for Ni-rich layered cathodes via multi-functional modification strategy

Enabling the Strengthened Structural and Interfacial Stability of High‐Nickel LiNi0.9Co0.05Mn0.05O2 Cathode by a Coating‐Doping‐Microstructure Regulation Three‐In‐One Strategy

Structural Reinforcement through High-Valence Nb Doping to Boost the Cycling Stability of Co-Free and Ni-Rich LiNi 0.9 Mn 0.1 O 2 Cathode Materials

Inverse Spinel-Structured Mg2MnO4 Coating to Enable Superior Thermal Stability of LiNi0.83Co0.12Mn0.05O2 Cathodes for Lithium-Ion Batteries

Stabilizing Ni‐Rich LiNi 0.92 Co 0.06 Al 0.02 O 2 Cathodes by Boracic Polyanion and Tungsten Cation Co‐Doping for High‐Energy Lithium‐Ion Batteries

Enhanced Li-ion Intercalation Kinetics and Lattice Oxygen Stability in Single-Crystalline Ni-rich Co-poor Layered Cathodes

Stabilizing nickel-rich layered oxide cathodes by magnesium doping for rechargeable lithium-ion batteries

Structure and Charge Regulation Strategy Enabling Superior Cycling Stability of Ni-Rich Cathode Materials.

Synergistic Effect of Microstructure Engineering and Local Crystal Structure Tuning to Improve the Cycling Stability of Ni-Rich Cathodes

New Insight into the Role of Mn Doping on the Bulk Structure Stability and Interfacial Stability of Ni‐Rich Layered Oxide

Excellent electrochemical properties of Ni-rich LiNi0.88Co0.09Al0.03O2 cathode materials co-modified with Mg-doping and LiBO2-coating for lithium ion battery

Dual-Modified Compact Layer and Superficial Ti Doping for Reinforced Structural Integrity and Thermal Stability of Ni-Rich Cathodes

Synergistic Doping Chemistry Enable the Cycling Properties of Single-Crystal Ni-rich Cathode for Lithium-Ion Batteries

Stabilized Nickel-Rich Oxide Cathode by the Confining Effect of Nb Lattice Anchoring and Epitaxial Shielding Layer

Surface Cobaltization for Boosted Kinetics and Excellent Stability of Nickel-rich Layered Cathodes