Abstract:Ultrasonic guided waves have attracted increasing attention for non-destructive testing (NDT) and structural health monitoring (SHM) of bridge cables. They offer advantages like single measurement, wide coverage of acoustical field, and long-range propagation capability. To design defect detection systems, it is essential to understand how guided waves propagate in cables and how to select the optimal excitation frequency and mode. However, certain cable characteristics such as multiple wires, anchorage, and polyethylene (PE) sheath increase the complexity in analyzing the guided wave propagation. In this study, guided wave modes for multi-wire bridge cables are identified by using a semi-analytical finite element (SAFE) technique to obtain relevant dispersion curves. Numerical results indicated that the number of guided wave modes increases, the length of the flat region with a low frequency of L(0,1) mode becomes shorter, and the cutoff frequency for high order longitudinal wave modes becomes lower, as the number of steel wires in a cable increases. These findings were used in design of transducers for defect detection and selection of the optimal wave mode and frequency for subsequent experiments. A magnetostrictive transducer system was used to excite and detect the guided waves. The applicability of the proposed approach for detecting and locating wire breakages was demonstrated for a cable with 37 wires. The present ultrasonic guided wave method has been found to be very responsive to the number of broken wires and is thus capable of detecting defects with varying sizes.

Nondestructive Testing of Bridge Stay Cable Surface Defects Based on Computer Vision

Ultrasonic Guided Wave Approach Incorporating SAFE for Detecting Wire Breakage in Bridge Cable

Design of Cable Detection Robot and Image Detection Method

Surface Defect Detection of Cable Based on Threshold Image Difference

A detection system for surface defects of bridge cable based on machine vision

Cable surface damage detection in cable-stayed bridges using optical techniques and image mosaicking

DAMAGE LOCATING OF CABLE-STAYED BRIDGES BASED ON DYNAMIC MEASUREMENT AND NEURAL NETWORK TECHNIQUE

The inspection method based on distributed machine vision for surface defects of bridge cables

Machine vision detecting system for bridge cable defect

Using Improved SIFT Algorithm to Implement Surface Defects Detection for Bridge Cable

Detecting Technology of Cable Surface Defect Based on Embedded System and Image Recognition

Cable Health Monitoring System for Long-span Cable-stayed Bridge

Surface Defect Detection Method of High Speed Railway Bridge Cables based on Optical Fiber Sensing Technology

Design of nondestructive examination system for bridge cables surface defect

Inspection Method of Cable-Stayed Bridge Using Magnetic Flux Leakage Detection: Principle, Sensor Design, and Signal Processing

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Force Monitoring of Steel Cables Using Vision-Based Sensing Technology: Methodology and Experimental Verification

Detecting Technology of Cabel Surface Defect Based on DSP and Image Recognition

Intelligent Inspection Robotic System for Bridge Cable Defect Identification and Positioning

Internal Defect Characterization of Bridge Cables Based on Terahertz Time-Domain Spectroscopy and Deep Learning

Image Mosaic Using SIFT for Bridge Cable Surface Flaw Detection