Abstract:The cable system is a critical load-bearing member and a vital factor of cable-stayed bridges; its health condition indicates the operation safety of these structures. The cable force estimation based on vibration is a major indicator for assessing the safety of cable-bearing bridges. Contact sensors are used to collect vibration in traditional cable systems. Recently, computer vision-based non-contact remote monitoring has gained popularity due to its cost, efficiency, and safety advantages. However, the cable is a unique structure with poor vision imaging, a low pixel share, and susceptibility to ambient interference. To address these issues, this study proposes a deep learning-based cable vibration recognition system. In complex environments, this system provides reliable recognition of cable vibration without the necessity of markers. The system consists of a composite model based on Resnet-34 (Residual Neural Network of 34 layers) and Swin-B (the base model in Swin Transformer), a linear rigid body motion recognizer based on Hough linear detection, and data processing. The pre-trained composite model performs cable segmentation on the video captured by the camera; this new video contains only cable data and is then transmitted to the linear rigid body recognizer, which recognizes cable vibration in the new video, and the cable force is determined by processing vibration data. As a result of the model experiments conducted in the laboratory and the cable test of cable-stayed bridges under complex outdoor conditions, the effectiveness and robustness of the system have been verified. The error of the proposed method in this study is found to be less than 2.0% comparing the results with that calculated from conventional sensors employed in the tests. The test results indicate that the system proposed in this paper is capable of conducting cable detection in complex environments.

Cable surface damage detection in cable-stayed bridges using optical techniques and image mosaicking

DAMAGE LOCATING OF CABLE-STAYED BRIDGES BASED ON DYNAMIC MEASUREMENT AND NEURAL NETWORK TECHNIQUE

Surface Defect Detection Method of High Speed Railway Bridge Cables based on Optical Fiber Sensing Technology

A Vision-Based System for Dynamic Displacement Measurement of Long-Span Bridges: Algorithm and Verification

Inspection of Surface Defects on Stay Cables Using a Robot and Transfer Learning

Vision-based multi-point real-time monitoring of dynamic displacement of large-span cable-stayed bridges

Multi-channel fiber optical sensing system for urban bridge cluster health monitoring

Force Monitoring of Steel Cables Using Vision-Based Sensing Technology: Methodology and Experimental Verification

Vision-based monitoring system for evaluating cable tensile forces on a cable-stayed bridge

Computer vision-based real-time continuous monitoring of the pose for large-span bridge cable lifting structures

An advanced vision-based deformation measurement method and application on a long-span cable-stayed bridge

Non-contact structural health monitoring of a cable-stayed bridge: case study

Research on Stay Cable Tension Estimation Based on Vision-Based Monitoring System

Damage detection of cables in cable-stayed bridges using vibration data measured from climbing robot

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Video-based multiscale identification approach for tower vibration of a cable-stayed bridge model under earthquake ground motions

Automated damage detection of bridge’s sub-surface defects from infrared images using machine learning

Multi-Point Displacement Monitoring of Bridges Using A Vision-Based Approach

Target-free recognition of cable vibration in complex backgrounds based on computer vision

Noncontact displacement monitoring of stay cables using videogrammetric method

Structure Design of Cable-Stayed Bridge Intelligent Detection Robot