Abstract:The ten-switch inverter is recently proposed in the literature to replace the neutral clamped point three-level inverter; it can produce a two/three-level output voltage using only ten switches. The conventional modulation strategies generate a large common mode voltage (CMV), which increases the leakage current. The use of the sinusoidal pulse width modulation (SPWM) produces a high CMV of V dc /2. On the other hand, using conventional space vector modulation (SVM) methods can only reduce the CMV to V dc /3. To achieve further reduction in the magnitude of the CMV, a new virtual SVM (VSVM) strategy is suggested. The space vector diagram is constructed with virtual vectors which can generate the lowest possible CMV (| V CM |= V dc /6). In the proposed VSVM, the action times are calculated and the switching sequence is synthesized for each region. The VSVM is applied to a ten-switch inverter through a simulation, and it is validated experimentally. It is compared to some existing modulation techniques, such as the SPWM method, two SVM methods and the conventional VSVM. Simulation and experimental results showed that the proposed VSVM algorithm can effectively reduce CMV to V dc /6. The use of virtual vectors does not affect the performance of the proposed algorithm in terms of the use of the DC bus voltage. In addition, it can effectively balance the neutral point voltage. However, the analysis of voltages and currents demonstrated that the use of virtual vectors increases the rate of harmonics compared to conventional SVM methods.

A Novel SVPWM Control Strategy for High-Frequency Link Dual Matrix-Type Inverter

A New Three Voltage Level Space Vector Modulation for High-Frequency Link Matrix Converter

A Novel SVPWM Control Strategy for Multiphase Dual Inverter for Electrical Vehicles

A Novel Modulation Scheme and a DC-Link Voltage Balancing Control Strategy for T-Type H-Bridge Cascaded Multilevel Converters

A Novel SVPWM Control Strategy for Dual Inverter System to Eliminate Common Mode Voltage with High Modulation

SVPWM Strategy of Dual Inverters and Zero-Sequence Voltage Suppression Method

An Enhanced SVPWM Strategy Based on Vector Space Decomposition for Dual Three-Phase Machines Fed by Two DC-Source VSIs

Hybrid Modulation Strategy for Two-Stage Matrix Converter and its Application in Vector Control of Doubly Fed Induction Generator.

A Dc Link Switch-Based Common Mode Voltage Reduction Scheme in Pwm Inverter Drives

A Novel Closed-Loop Control Strategy for CVCF Inverters

Novel SVPWM for Open Winding PMSM Drives With Simultaneous Common Mode Voltage Control and Full Frequency Zero Sequence Current Suppression

Modified Synchronized SVPWM Strategies to Reduce CMV for Three-Phase VSIs at Low Switching Frequency

A Novel SVPWM Scheme for Field-Oriented Vector-Controlled PMSM Drive System Fed by Cascaded H-Bridge Inverter

A Voltage Spike Suppression Strategy Based on De-Re-Coupling Idea for the Three-Phase High-Frequency Isolated Matrix-Type Inverter

New Discontinuous Space Vector Modulation Strategies for Impedance-Source Inverter with Superior Thermal and Harmonic Performance

A Shifted SVPWM Method to Control DC-Link Resonant Inverters and Its FPGA Realization

Strategy of Synchronized SVPWM for Dual Three-Phase Machines in Full Modulation Range

Dual-frequency SVPWM Strategy for Five-Phase Voltage Source Inverter

Topology and Modulation for a New Indirect Matrix Converter to Reduce the Common-Mode Voltage

A New Virtual Space Vector Modulation Technique Applied to the Ten-Switch Inverter for Common Mode Voltage Reduction

A novel modulation with voltage balancing control for a modular matrix converter