Abstract:Underwater manipulators are important robotic tools in the exploration of the ocean environment. Up to now, most existing underwater manipulators are rigid and with fixed 5 or 7 degrees of freedom (DOF), which may not be very suitable for some complicated underwater scenarios (e.g., pipe networks, narrow deep cavities, etc.). The biomimetic concept of muscles and tendons is also considered as continuum manipulators, but load capacity and operation accuracy are their essential drawbacks and thus limit their practical applications. Recently, the cable-driven technique has been developed for manipulators, which can include numerous joints and hyper-redundant DOF to execute tasks with dexterity and adaptability and thus they have strong potential for these complex underwater applications. In this paper, the design of a novel cable-driven hyper-redundant manipulator (CDHRM) is introduced, which is driven by multiple cables passing through the tubular structure from the base to the end-effector, and the joint numbers can be extended and decided by the specific underwater task requirements. The kinematic analysis of the proposed CDHRM is given which includes two parts: the cable-joint kinematics and the joint-end kinematics. The geometric relationship between the cable length and the joint angles are derived via the established geometric model for the cable-joint kinematics, and the projection relationship between the joint angles and end-effector’s pose is established via the spatial coordinate transformation matrix for the joint-end kinematics. Thus, the complex mapping relationships among the cables, joints and end-effectors are clearly achieved. To implement precise control, the kinematic control scheme is developed for the CDHRM with series-parallel connections and hyper-redundancy to achieve good tracking performance. The experiment on a real CDHRM system with five joints is carried out and the results verify the accuracy of kinematics solution, and the effectiveness of the proposed control design. Particularly, three experiments are tested in the underwater environment, which verifies its good tracking performance, load carrying and grasping capacity.

Design, Kinematics and Control of a Modular Cable-Driven Manipulator for Fine Manipulation.

Dynamic Modeling and Analysis for Coupling Processing 6-DOF 3 P3 R Manipulator

Design and Kinematic Control of the Cable-Driven Hyper-Redundant Manipulator for Potential Underwater Applications

Design and Analysis of 7-DOF Cable-Driven Manipulator

Force Sensing and Compliance Control for a Cable-Driven Redundant Manipulator

Stiffness-Based Hybrid Motion/ Force Control for Cable-Driven Serpentine Manipulator*

Design and validation of cable-driven hyper-redundant manipulator with a closed-loop puller-follower controller

A Closed-Loop Controller for Cable-Driven Hyper-Redundant Manipulator with Joint Angle Sensors.

Development of a linear decoupling cable-driven manipulator with independent driving joints ,

Design Paradigm for Human Size Manipulator with High Payload, Repeatability, and Bandwidth

Structural Design and Static Analysis of a Cable-Driven Underactuated Manipulator with Locking Devices

Design of Multi-Axis Motion Controller and Its Application on Manipulators

Hybrid Tension-Position Control of Cable-Driven Serial Manipulator to Improve Accuracy and Avoid Cable Slack and Breakage

Design and Stiffness Analysis of a Novel 7-DOF Cable-Driven Manipulator

A Lightweight Redundant Manipulator with High Stable Wireless Communication and Compliance Control

Design and Nonlinear Modeling of a Modular Cable Driven Soft Robotic Arm

Control Method for Robotic Manipulation of Heavy Industrial Cables

Design and Control of a Novel Cable Driven Parallel Mechanism

A Lightweight Modular Continuum Manipulator with IMU-based Force Estimation

Kinematic analysis and design optimization of a cable-driven universal joint module

Efficient Inverse Kinematics and Planning of a Hybrid Active and Passive Cable-Driven Segmented Manipulator