Abstract:Stereolithographic additive manufacturing technology has developed from point-by-point scanning exposure to layer-by-layer masking curing and even volumetric printing. Rapid prototyping is one of the important goals pursued by researchers. A continuous three-dimensional (3D) printing system based on the dual-color photoinitiation and photoinhibition is proposed with the aim of further improving printing speed. The process of continuous 3D printing is realized through the anti-polymerization layer between the cured part and the window generated by the ultraviolet (UV) light sheet (355 nm), and dynamic masking with the blue light (470 nm). The volume of the anti-polymerization layer can be adjusted by the intensity ratio of the incident lights (I-UV,I- 0/I-blue,I-0) and the size of UV laser spot to enhance the reflow filling rate of the liquid resin. For the orthogonal Gaussian anti-polymerization layer, an intensity ratio of 28.6 allows for an inhibition volume of 97.1% of the desired rectangular anti-polymerization zone with a height of 1 mm. The simulation analysis of continuous 3D printing process by flow-structure interaction reveals that the increase of the thickness of the anti-polymerization layer effectively improves the filling rate of the resin and the cross-sectional area of printing, and reduces the stress of the cured part. The experiments with two different 3D structures printing demonstrate that the filling rate and the stress have virtually no effect on the printing process at a large-scale thickness of the anti-polymerization layer, and the printing speed is capable of reaching 200 mu m/s. Certainly, the printing volume and complexity can be further improved with the improvement of the system and the optimization of the resin.

Simulation of Resin Filling Distance During the Pulling-Up Stage for Rapid DLP Printing

Simulation and Experimental Investigation of Immersion Flow Field in Immersion Lithography

Developing the optimized control scheme for continuous and layer-wise DLP 3D printing by CFD simulation

Printing Depth Modeling, Printing Process Quantification and Quick-Decision of Printing Parameters in Micro-Vat Polymerization

Simulation Of The Velocity Distribution For Immersion Lithography

Design for the reduction of volume shrinkage-induced distortion in digital light processing 3D printing

Simulation and Process Analysis of DLP 3D Printing with High-strength Resin

High-accuracy DLP 3D printing of closed microfluidic channels based on a mask option strategy

Investigation of Resist Filling Behavior in Microimprint Lithography by Computational Fluid Dynamics Simulation and Defocusing Digital Particle Image Velocimetry

Modeling extrusion process and layer deformation in 3D concrete printing via smoothed particle hydrodynamics

Modeling the Resin Flow and Numerical Simulation of the Filling Stage for Vacuum-Assisted Resin Infusion Process

Three-Dimensional Numerical Simulation of the Filling Stage in Resin Infusion Process

Recent Innovations in Interfacial Strategies for DLP 3D Printing Process Optimization

Resist deformation and flow fields in microimprint lithography

Analysis of Upper- and Lower-Limits of Fill Time in Resin Transfer Mold Filling Simulation

Rapid Continuous 3D Printing Via Orthogonal Dual-Color Photoinitiation and Photoinhibition

A Scalable Digital Light Processing 3D Printing Method

A Systematic Printability Study of Direct Ink Writing Towards High-Resolution Rapid Manufacturing

Experimental Research on Resist Filling Behavior in Microimprint Lithography by Using Defocusing Digital Particle Image Velocimetry

Effect of Resin Accumulation on Filling Process in Roll-To-Roll Uv Imprint Lithography

Investigation of resist filling profile evolution in microimprint lithography