Abstract:A microwave photonic time division multiplexing scheme is proposed and experimentally demonstrated for quasi-distributed demodulation of the cascaded fiber ring resonators (FRRs) in series. By arranging proper delay, the temporal pulse train of each FRR transformed from the whole frequency response can be recognized and separated in time domain. After extracting a specific temporal pulse train, the frequency response of the corresponding FRR is recovered by applying zero padding and fast Fourier transform (FFT), for which the reconstructed frequency resolution is improved and the spectral overlap in original frequency response is eliminated. Three situations with different delay lengths are performed to illustrate the contribution of delay to the multiplexing capability. Three FRRs are cascaded for experimentally verifying the multiplexing scheme, whose frequency responses are separately obtained and utilized for independent temperature sensing. The experimental results indicate that the microwave photonic time division multiplexing achieves the independently quasi-distributed demodulation of the cascaded FRRs with the temperature sensitivity of 49.1 kHz/∘C at about 4 GHz. By accurately allocating the staggered time slots, such scheme could extremely improve and arbitrarily adjust the spatial resolution, reduce the power consumption and increase the multiplexing capability, rendering a universal strategy for the multiplexing of other cavity ring-down systems.

Quasi-distributed Demodulation of Fiber Ring Resonators Based on Microwave Photonic Time Division Multiplexing

Nyquist-Filtering (de)multiplexer Using a Ring Resonator Assisted Interferometer Circuit

Multiplexing of RF-assisted Fiber Ring Resonators Based on Phase-Shift Amplification

White-light-driven ultrahigh-resolution fiber ring resonator array based on frequency division multiplexing technology

An ultra-high-speed photonic temporal differentiator using cascaded SOI microring resonators

Microwave Photonics Interrogation for Multiplexing Fiber Fabry-Perot Sensors.

All-optical frequency up-conversion and demultiplexing with a fiber-ring-based microwave photonic filter in an IM-DD radio-over-fiber system

Microwave frequency multiplication based on cascaded fiber ring microwave photonic filters

A Photonic Microwave Frequency Quadrupler Using Two Cascaded Intensity Modulators with Repetitious Optical Carrier Suppression

Simultaneous wavelength and frequency encoded microstructure based quasi-distributed temperature sensor

Microwave Frequency Multiplication Based on Double-Pass Modulation and Fiber Ring Microwave Photonic Filters

Integrated Reconfigurable Optical Add-Drop Multiplexers Based on Cascaded Microring Resonators

Reconfigurable Photonic Microwave Mixer With Mixing Spurs Suppressed and Dispersion Immune for Radio-Over-Fiber System

80 Gb/s photonic temporal differentiator based on cascaded SOI microring resonators

Multiplexing of Fabry-Pérot Sensor by Frequency Modulated Continuous Wave Interferometry for Quais-Distributed Sensing Application

Sensitivity Enhanced Fiber Sensor Based on a Fiber Ring Microwave Photonic Filter with the Vernier Effect

Subcarrier Demultiplexing Using a Tunable Single Resonance Microwave Photonic Filter in Radio-over-fiber System

Phase-shifted demodulation scheme for fiber-optic interferometric sensors with combined waveform phase modulation

Microwave-Photonic Interferometer for Simultaneous Sensing of Loss and Temperature with Fiber Ring Resonator

Quasi-Distributed Dual-Parameter Optical Fiber Sensor Based on Cascaded Microfiber Fabry–Perot Interferometers

Frequency Division Multiplexing OTDR with Fast Signal Processing