Abstract:Abstract This paper presents 3D Fabry–Pérot (FP) cavities fabricated directly onto cleaved ends of low-loss optical fibers by a two-photon polymerization (2PP) process. This fabrication technique is quick, simple, and inexpensive compared to planar microfabrication processes, which enables rapid prototyping and the ability to adapt to new requirements. These devices also utilize true 3D design freedom, facilitating the realization of microscale optical elements with challenging geometries. Three different device types were fabricated and evaluated: an unreleased single-cavity device, a released dual-cavity device, and a released hemispherical mirror dual-cavity device. Each iteration improved the quality of the FP cavity’s reflection spectrum. The unreleased device demonstrated an extinction ratio around 1.90, the released device achieved 61, and the hemispherical device achieved 253, providing a strong signal to observe changes in the free spectral range of the device’s reflection response. The reflectance of the photopolymer was also estimated to be between 0.2 and 0.3 over the spectrum of interest. The dual-cavity devices include both an open cavity, which can interact with an interstitial medium, and a second solid cavity, which provides a static reference reflection. The hemispherical dual-cavity device further improves the quality of the reflection signal with a more consistent resonance, and reduced sensitivity to misalignment. These advanced features, which are very challenging to realize with traditional planar microfabrication techniques, are fabricated in a single patterning step. The usability of these FP cavities as thermal radiation sensors with excellent linear response and sensitivity over a broad range of temperature is reported. The 3D structuring capability the 2PP process has enabled the creation of a suspended FP heat sensor that exhibited linear response over the temperature range of 20 oC –120 oC; temperature sensitivity of ∼50 pm oC −1 at around 1550 nm wavelength; and sensitivity improvement of better than 9x of the solidly-mounted sensors.

Microwave Photonics Interrogation for Multiplexing Fiber Fabry-Perot Sensors.

Multiplexing of Fabry-Pérot Sensor by Frequency Modulated Continuous Wave Interferometry for Quais-Distributed Sensing Application

High-Speed and High-Resolution Optical Fiber Sensor Interrogation Based on Optical Injection in Semiconductor Laser and Microwave Filtering

A Review of Recent Results on Simultaneous Interrogation of Multiple Fiber Bragg Grating-Based Sensors Using Microwave Photonics

Three-dimensional Fabry–Pérot cavities sculpted on fiber tips using a multiphoton polymerization process

Segmented Fiber Optic Sensors Based on Hybrid Microwave-Photonic Interrogation

Microwave photonic filter-based interrogation system for multiple fiber Bragg grating sensors.

A microwave photonic scheme for improving the sensitivity of Mach-Zehnder optical fiber interferometer sensor

Microwave Frequency Measurement Based on Phase Modulation to Intensity Modulation Conversion Using Fiber Bragg Grating

Microwave Photonic Systems for Demodulation of Optical Fiber Interference Signals

Instantaneous Microwave Frequency Measurement with a Uniform Resolution and Improved Dynamic Range

Truly Distributed and Ultra-Fast Microwave Photonic Fiber-Optic Sensor

Optical Fiber Fabry–Pérot Microfluidic Sensor Based on Capillary Fiber and Side Illumination Method

Multimode Fiber-Based Interferometric Sensors With Microwave Photonics

Simultaneous wavelength and frequency encoded microstructure based quasi-distributed temperature sensor

Extensible multi-wavelength interrogation method for arbitrary cavities in low-fineness multi-cavity Fabry-Pérot interferometric sensors

Femtosecond Laser Fabricated In-Line Micro Multicavity Fiber FP Interferometers Sensor

Optical Coherence-Multiplexed Sensors Based on In-Fiber Michelson

Prototype Multiplexing System for Use with a Large Number of Fiber Optic Based Extrinsic Fabry-Perot Sensors Exploiting Low-Coherence Interrogation

Temperature-insensitive Quasi-distributed Fiber-optic Fabry-Perot High-pressure sensing based on microwave interference system

High-Frequency Fiber Bragg Grating Sensing Interrogation System Using Sagnac-Loop-Based Microwave Photonic Filtering