Abstract:The large-scale use of coal, oil, and natural gas will cause environmental pollution and resource shortages, which is incompatible with the sustainable development. Therefore, it is essential to the development of renewable energy. H-2 has a high heat of combustion, and it's combustion products do not include greenhouse gases. so it is considered as an ideal clean energy carrier. Industrial hydrogen production methods will bring CO2 inevitably. As an emerging energy conversion device, hydrogen produced by water splitting has simple equipment and little pollution, making it the first choice for clean energy in the future. Generally, the adsorption energy of hydrogen on the surface of precious metal catalysts is close to zero, and its hydrogen evolution reaction (HER) performance is the most prominent. Pt is an excellent HER catalyst. Commercial Pt/C has high alkaline HER performance, but its higher cost, material instability and resource scarcity limit its widespread applications. Therefore, this research is devoted to the development of high-activity, low-cost transition metal catalysts for HER by water splitting. Firstly, CoMoO4 nanorods were synthesized by hydrothermal method. Then, using the precursor morphology oriented strategy method, the activated Co9S8/MoS2 heterostructure catalyst was successfully prepared by sulfurating Co-MoO4 into CoS2/MoS2 and further, calcining CoS2/MoS2 nanorod in hydrogen atmosphere. X-rays diffraction (XRD), transmission electron microscopy (TEM), electron spin resonance (ESR), Raman spectra, X-ray photoelectron spectra (XPS) and synchrotron-based X-ray absorption fine structure (XAFS) characterizations exhibit that the Co coordination mode change from octahedron in CoS2 to tetrahedron in Co9S8, leading to the activation of inert basal plane in MoS2. Owing to this activation, the interlayer spacing of MoS2 is reduced and thus generate abundant defects. Meanwhile, the increased electrochemical surface area (ECSA) and roughness of the catalysts are more conducive to the adsorption of H*. The test of the contact angle data show that the electrode has good hydrophilicity, which can facilitate the penetration of electrolyte and diffusion of gas molecules quickly. When the current density is at 10 mA.cm(-2) in 1 KOH solution, an overpotential of 84 mV and a Tafel slope of 93 mV.dec(-1) can be achieved. Due to the strong interaction between different components of the heterostructures, the nanorods possess good structural stability in alkaline solutions. This work highlights the vital role of the sulfides heterostructure construction in HER, opening a new way to advanced alkaline HER catalysts.

High efficiency of energy recovery from formaldehyde wastewater over CoS 2 @MoS 2 heterostructure: Enhanced electronic transfer and mechanism

Strong Interfacial Coupling of MoS2/g-C3N4 Van De Waals Solids for Highly Active Water Reduction

Mutually Beneficial Co3O4@MoS2 Heterostructures As a Highly Efficient Bifunctional Catalyst for Electrochemical Overall Water Splitting

The dual built-in electric fields across CoS/MoS2 heterojunctions for energy-saving hydrogen production coupled with sulfion degradation

Interfacial engineering of heterostructured carbon-supported molybdenum cobalt sulfides for efficient overall water splitting

MOF-derived CoS2/WS2 electrocatalysts with sulfurized interface for high-efficiency hydrogen evolution reaction: Synthesis, characterization and DFT calculations

Modulating Silver Performance in Electrocatalytic Oxidation of HCHO via SMSI between Ag‐Co3O4 Interfaces

Construction of Co3S4/MoS2 p-p heterojunction as an efficient catalyst for water splitting and electrochemical oxidation of organic molecules

Construction of Co9S8/MoS2 Heterostructures for Enhancing Electrocatalytic Hydrogen Evolution Reaction

MoS2@CoFe-MOF catalysts by one-pot hydrothermal synthesis enhanced electron interaction between MoS2 nanoflower and bimetallic MOF for efficient oxygen evolution

Interface prompted highly efficient hydrogen evolution of MoS2/CoS2 heterostructures in wide pH range

Building the Confined CoS2/MoS2 Nanoreactor Via Interface Electronic Reconfiguration to Synchronously Enhance Activity and Stability of Heterogeneous Fenton-like Reactions

Mechanism and performance evaluation of FeSe2 and MoS2-loaded carbon fiber sheet as a novel heterogeneous Fenton-like catalyst

Highly efficient MoS2/WS2 heterojunctiont for CO2 reduction reaction: strong electronic transmission

Deliberate Amorphization of Co‐MOF for Constructing Crystalline‐Amorphous Heterostructures Toward High‐Performance Water Electrolysis

MoS 2 /CoS 2 with heterostructure in-situ grown on the surface of electrospinning carbon nanotube for efficient hydrogen evolution reaction

Spatial confined synthesis of submicron Fe-MoS2 with abundant surface cationic groups and sulfur vacancies for enhanced peroxymonosulfate activation

Mo-doped cobaltous sulfide nanosheet arrays as efficient catalysts for the sulfion oxidation reaction promoting hydrogen production with ultra-low electric energy consumption

Fabrication of CoS2-MoS2 heterostructure via interface engineering toward efficient dual-pH hydrogen evolution

Interfacial engineering of Co-doped 1T-MoS2 coupled with V2C MXene for efficient electrocatalytic hydrogen evolution

Built-in Electric Field and Core-Shell Structure of the Reconstructed Sulfide Heterojunction Accelerated Water Splitting