Abstract:Vector bending sensors can be utilized to detect the bending curvature and direction, which is essential for various applications such as structural health monitoring, mechanical deformation measurement, and shape sensing. In this work, we demonstrate a temperature-insensitive vector bending sensor via parallel Farby–Perot interferometers (FPIs) fabricated by etching and splicing a multicore fiber (MCF). The parallel FPIs made in this simple and effective way exhibit significant interferometric visibility with a fringe contrast over 20 dB in the reflection spectra, which is 6 dB larger than the previous MCF-based FPIs. And such a device exhibits a curvature sensitivity of 0.207 nm/m−1 with strong bending-direction discrimination. The curvature magnitude and orientation angle can be reconstructed through the dip wavelength shifts in two off-diagonal outer-core FPIs. The reconstruction results of nine randomly selected pairs of bending magnitudes and directions show that the average relative error of magnitude is ~4.5%, and the average absolute error of orientation angle is less than 2.0°. Furthermore, the proposed bending sensor is temperature-insensitive, with temperature at a lower sensitivity than 10 pm/°C. The fabrication simplicity, high interferometric visibility, compactness, and temperature insensitivity of the device may accelerate MCF-based FPI applications.

High-sensitivity Vector Bend Sensor Based on a Fiber Directional Coupler Inscribed by a Femtosecond Laser.

Integrated All-Fiber Sensor for Simultaneous Measurements of Curvature and Temperature

An Inline Fiber Curvature Sensor Based on Eccentric Core Fiber and Off-Axis Air Cavity Fabry-Pérot Interferometer

Highly Sensitive Displacement Sensor Based on Composite Interference Established Within a Balloon-Shaped Bent Multimode Fiber Structure.

Highly Sensitive Vector Bending Sensor Based on an Embedded Multimode D-shaped LPFG.

Highly Compact Vector Bending Sensor With Microfiber-Assisted Mach– Zehnder Interferometer

In-Fiber Thermally Diffused Coupler and Fiber Bragg Grating Inscribed in Twin-Core Fiber for Sensitivity-Enhanced Vector Bending Sensing

Temperature-insensitive vector curvature sensor based on four-core fiber offset structure

Design of Two-Dimensional Bending Vector Sensor Based Onselective Infiltration of Photonic Crystal Fiber

Curvature sensor based on femtosecond laser-inscribed straight waveguide in FMF

A Vector Bending Sensor Based on a Core-Offset Long Period Fiber Grating Induced by an Arc-Discharge

Temperature Insensitive Optical Fiber Laser Bend Sensor with A Low Detection Limit

Highly Sensitive Bending Sensor Based on Er^3+-doped DBR Fiber Laser

Compact omnidirectional multicore fiber-based vector bending sensor

Simultaneous Measurement of Curvature Vector and Temperature Based on Composite Gratings Inscribed on D-Shaped Fiber

Compact Robust Vector Bending Sensor Based on Single Stress-Applying Fiber

Highly sensitive bending sensor based on Er3+-doped DBR fiber laser

Highly Sensitive Bending Sensor Based on a Tapered Hollow Core Microstructured Optical Fiber

Sensitivity-enhanced two-dimensional bending sensor based on single-mode fiber measurement

Optical Fiber Sensor for Curvature and Temperature Measurement Based on Anti-Resonant Effect Cascaded with Multimode Interference

Parallel Farby–Perot Interferometers in an Etched Multicore Fiber for Vector Bending Measurements