Abstract:Using granulated blast furnace slag (GGBS) as the volcanic ash material and fly ash (FA) as the supplementary material, the study was conducted to investigate the mix proportions of an alkali-activated solid waste cementitious material under the stimulating effect of alkali activator carbide slag (CS). This type of cementitious material could serve as a substitute for a portion of cement usage, contributing to resource conservation and mitigating environmental pollution caused by solid waste. This facilitates green and sustainable development. Firstly, an analysis of three raw materials was conducted, and the mix proportions were designed with reference to the CaO-Al 2 O 3 -SiO 2 system of Portland cement. Then 28 groups of specimens were prepared based on the designed mix proportions. The flowability and setting time of each group of specimens were tested. It was observed that an increase in the amount of CS and a decrease in the amount of GGBS resulted in decreased flowability and earlier setting times of the specimens. Additionally, FA exhibited a retarding effect on setting time. Compressive strength tests were conducted on these specimens, revealing that the optimal CS content ranged between 20 % and 40 %. Overall, FA had minimal impact on compressive strength, but it contributed to increased compressive strength in the specimens at later ages. Subsequently, microscopic characterization of the hydration products was performed using X-ray Diffraction (XRD), Fourier Transform Infrared (FTIR), Differential Thermal Analysis (DTA), Scanning Electron Microscope (SEM), and Energy Dispersive Spectrometer (EDS). The hydration products were identified as predominantly composed of calcium silicate hydrate. The quality and defects in the microstructure of gel products from various specimen formulations were compared to elucidate differences in macroscopic performance. Finally, the hydration process mechanism diagram of alkali-activated materials was presented to illustrate the stimulation and formation of gel products, primarily composed of C-S-H. This diagram revealed the principles behind the action of alkali-activated cementitious materials. The proposed design and testing methodology for the GGBS-FA-CS system in this study had certain reference significance for research in the direction of alkali-activated solid waste cementitious materials.

A State-of-the-art Review on the Setting Behaviours of Ground Granulated Blast Furnace Slag- and Metakaolin-Based Alkali-Activated Materials

Preparation of Coal Gasification Coarse Slag-Based Alkaline Activator and Its Activation Mechanism in Alkali-Activated Slag

Recent progress in understanding setting and hardening of alkali-activated slag (AAS) materials

Study on the Compressive Strength and Reaction Mechanism of Alkali-Activated Geopolymer Materials Using Coal Gangue and Ground Granulated Blast Furnace Slag

Properties, Microstructure Development and Life Cycle Assessment of Alkali-Activated Materials Containing Steel Slag under Different Alkali Equivalents

Modification mechanism of flue gas desulfurization gypsum on fly ash and ground granulated blast-furnace slag alkali-activated materials: Promoting green cementitious material

Properties, mineralogy and microstructure evolution of 4-year calcium silicate slag-based alkali-activated materials

Preparation and microstructure analysis of alkali-activated ground granulated blast furnace slag-steel slag grouting materials

Admixture Effects on the Rheological/Mechanical Behavior and Micro-Structure Evolution of Alkali-Activated Slag Backfills

Understanding the setting behaviours of alkali-activated slag from the dissolution-precipitation point of view

Study on the properties of alkali-activated phosphorus slag mortar mixed with granulated blast furnace slag/fly ash

One-Part Alkali-Activated Materials: State of the Art and Perspectives

Recent Advances In Chemical Admixtures For Improving The Workability Of Alkali-Activated Slag-Based Material Systems

Review of the materials composition and performance evolution of green alkali-activated cementitious materials

Assessment of the performance of alkali-activated slag/fly ash using liquid and solid activators: early-age properties and efflorescence

Study on the preparation, performance, and mechanism for solid waste cementitious materials

Parameter Study of Metakaolin/ Blast Furnace Slag-Based Alkali-Activated Materials

Fresh and Hardened Properties of Alkali-Activated Fly Ash/slag Binders: Effect of Fly Ash Source, Surface Area, and Additives

Preparation and performance of AACM with red mud and GGBFS: effectiveness of alkali activator

Critical parameters affecting the thermal resistance of alkali-activated aluminosilicate wastes: Current understanding and future directions

Alkali-activated binder based on red mud with class F fly ash and ground granulated blast-furnace slag under ambient temperature